topic AP1142 cli clear command missing in Wireless

AP1142 cli clear command missing

Robert Rinnberger — Sun, 04 Jul 2021 04:18:40 GMT

Hello all,

I'm using a WLC 5508 and light weight 1142 AP's with software version 7.0.116

I wonder why there is no cli-clear or cli-reload command if I am connected via SSH/telnet to an access point. When I connect through console port there are this commands available. Is this a configuration issue?

Any ideas? Thanks in advance.

Regards,

Robert

AP1142 cli clear command missing

Scott Fella — Fri, 30 Dec 2011 03:12:42 GMT

I was able to ssh to my 1142 and do a clear and reload command. Did you make sure you are in enable mode? I'm running 7.0.220.0, but I don't think that matters.

Re: AP1142 cli clear command missing

Robert Rinnberger — Sat, 31 Dec 2011 08:15:38 GMT

Hello,

Yes, i've been in enable mode. i will try the new software image.

Regards,

Sent from Cisco Technical Support iPad App

AP1142 cli clear command missing

Scott Fella — Sat, 31 Dec 2011 15:58:36 GMT

Keep us posted if that does indeed fix it.

AP1142 cli clear command missing

Robert Rinnberger — Wed, 04 Jan 2012 15:51:00 GMT

shame on me

I've worked with the default login and password. After changing it in global config dialog at my WLC, I can see much more commands at the cli prompt.

Re: AP1142 cli clear command missing

Scott Fella — Wed, 04 Jan 2012 15:53:32 GMT

At least you got it working.

Sent from Cisco Technical Support iPhone App