topic dot11 activity-timeout in Wireless

dot11 activity-timeout

john.wright — Sun, 04 Jul 2021 04:09:58 GMT

I read in the documentation that AP's by default are set to 60 second activity-timeout.

What does that mean in terms of the client association? Does the client disassociate after 60 seconds? What happens after the 60 second timer expires?

I am researching why many users across our campus are complaining that they lose connection from time to time.

I have autonomus 1141N with 12.4(25d)JA1.

dot11 activity-timeout

Viten Patel — Thu, 15 Dec 2011 05:09:42 GMT

can you point out to the doc which states that? are the clients getting disconnected at regular intervals or randomly?

dot11 activity-timeout

George Stefanick — Thu, 15 Dec 2011 05:36:38 GMT

I think he means this.

dot11 activity-timeout

Use the dot11 activity-timeout global configuration command to configure the number of seconds that the access point tracks an inactive device (the number depends on its device class). The access point applies the unknown device class to all non-Cisco Aironet devices.

dot11 activity-timeout { [ client-station | repeater | bridge | workgroup-bridge | unknown ] [ default <1 - 100000> ] [ maximum <1 - 100000> ] }

Syntax Description


client-station, repeater, bridge, workgroup- bridge	Specify Cisco Aironet device classes
unknown	Specifies unknown (non-Cisco Aironet) device class
default <1 - 100000>	Specifies the activity timeout value that the access point uses when a device associates and proposes a zero-refresh rate or does not propose a refresh rate
maximum <1 - 100000>	Specifies the maximum activity timeout allowed for a device regardless of the refresh rate proposed by a device when it associates

Defaults

Table 2-4 lists the default activity timeouts for each device class. All values are in seconds.

Table 2-4 Default Activity Timeouts
Device Class	Default Timeout
unknown	60
client-station	1800
repeater	28800
bridge	28800
workgroup-bridge	28800