topic Load Threshold Violation Error in Wireless https://community.cisco.com/t5/wireless/load-threshold-violation-error/m-p/1788953#M212342 <HTML><HEAD></HEAD><BODY><P>The WCS thersholds are "caned" alerts. You can set these to alert you when a certain thershold is triggered. Nothing more. Nothing less. </P></BODY></HTML> Mon, 03 Oct 2011 19:02:06 GMT George Stefanick 2011-10-03T19:02:06Z Load Threshold Violation Error https://community.cisco.com/t5/wireless/load-threshold-violation-error/m-p/1788950#M212339 <P>Hi,</P><P></P><P>Anybody please describe why WCS shows Load Threshold Violation Error???&nbsp; Thanks </P> Sun, 04 Jul 2021 03:51:26 GMT https://community.cisco.com/t5/wireless/load-threshold-violation-error/m-p/1788950#M212339 Manesh Rajan 2021-07-04T03:51:26Z Load Threshold Violation Error https://community.cisco.com/t5/wireless/load-threshold-violation-error/m-p/1788951#M212340 <HTML><HEAD></HEAD><BODY><P>Problem : Too many clients associated with this radio interface </P><P></P><P>Solution:</P><P>1) Verify the clients counts on this radio interface. If the threshold for this trap is too low, you may need to re-adjust it.</P><P></P><P>2)Add new capacity&nbsp; to the physical loaction&nbsp; if the clients counts is a frequency issue on this radio</P><P></P><P></P><P>I got guys.. <span class="lia-unicode-emoji" title=":winking_face:">😉</span></P></BODY></HTML> Mon, 03 Oct 2011 11:40:57 GMT https://community.cisco.com/t5/wireless/load-threshold-violation-error/m-p/1788951#M212340 Manesh Rajan 2011-10-03T11:40:57Z Load Threshold Violation Error https://community.cisco.com/t5/wireless/load-threshold-violation-error/m-p/1788952#M212341 <HTML><HEAD></HEAD><BODY><P>Anybody has encountred this problem? please share their experience... </P></BODY></HTML> Mon, 03 Oct 2011 18:55:59 GMT https://community.cisco.com/t5/wireless/load-threshold-violation-error/m-p/1788952#M212341 Manesh Rajan 2011-10-03T18:55:59Z Load Threshold Violation Error https://community.cisco.com/t5/wireless/load-threshold-violation-error/m-p/1788953#M212342 <HTML><HEAD></HEAD><BODY><P>The WCS thersholds are "caned" alerts. You can set these to alert you when a certain thershold is triggered. Nothing more. Nothing less. </P></BODY></HTML> Mon, 03 Oct 2011 19:02:06 GMT https://community.cisco.com/t5/wireless/load-threshold-violation-error/m-p/1788953#M212342 George Stefanick 2011-10-03T19:02:06Z