topic Trouble with Aironet 1300 series in Wireless https://community.cisco.com/t5/wireless/trouble-with-aironet-1300-series/m-p/1752505#M21254 <HTML><HEAD></HEAD><BODY><P>Hi Jim,</P><P></P><P>The 1310 bridge/injector do not have a mode button for configuration reset. However, you can reset the configuration if you use the console port on the injector:</P><P></P><P><TT>1) Connect console port and power-cycle unit<BR /> 2) When IOS starts loading, hit ESC key twice to get to the boot-loader prompt<BR /> 3) At the boot-loader prompt show a directory of the flash filesystem (dir&nbsp; flash:)<BR /> 4) Delete or rename the files "config.txt" and "env_vars", then boot the&nbsp; system ("delete flash:/config.txt" "delete flash:/env_vars")</TT></P><P></P><P>(The default user/pass should be Cisco/Cisco)</P><P></P><P>-Patrick Croak</P><P>Wireless TAC</P></BODY></HTML> Tue, 16 Aug 2011 17:48:16 GMT pcroak 2011-08-16T17:48:16Z Trouble with Aironet 1300 series https://community.cisco.com/t5/wireless/trouble-with-aironet-1300-series/m-p/1752504#M21253 <P>I have a cisco aironet 1300 series and i need to reset it back to factory default.&nbsp; the directions say push the mode button while the access point is off and then turn it on while the mode button is down...</P><P>i don't see one button on this thing anywhere.</P><P>help needed </P> Sun, 04 Jul 2021 03:35:05 GMT https://community.cisco.com/t5/wireless/trouble-with-aironet-1300-series/m-p/1752504#M21253 jim.metcalf74 2021-07-04T03:35:05Z Trouble with Aironet 1300 series https://community.cisco.com/t5/wireless/trouble-with-aironet-1300-series/m-p/1752505#M21254 <HTML><HEAD></HEAD><BODY><P>Hi Jim,</P><P></P><P>The 1310 bridge/injector do not have a mode button for configuration reset. However, you can reset the configuration if you use the console port on the injector:</P><P></P><P><TT>1) Connect console port and power-cycle unit<BR /> 2) When IOS starts loading, hit ESC key twice to get to the boot-loader prompt<BR /> 3) At the boot-loader prompt show a directory of the flash filesystem (dir&nbsp; flash:)<BR /> 4) Delete or rename the files "config.txt" and "env_vars", then boot the&nbsp; system ("delete flash:/config.txt" "delete flash:/env_vars")</TT></P><P></P><P>(The default user/pass should be Cisco/Cisco)</P><P></P><P>-Patrick Croak</P><P>Wireless TAC</P></BODY></HTML> Tue, 16 Aug 2011 17:48:16 GMT https://community.cisco.com/t5/wireless/trouble-with-aironet-1300-series/m-p/1752505#M21254 pcroak 2011-08-16T17:48:16Z