topic Re: IP addressing in Wireless

IP addressing

ohassairi — Sun, 04 Jul 2021 02:37:01 GMT

we are going to install 20 AP with 2 WC.

the company that will install the devices said: it is a best practice to choose the management IPs of the AP in one subnet and the management IPs of the controllers in another subnet.

is this true? any explanation why ?

Re: IP addressing

Federico Ziliotto — Tue, 04 Jan 2011 11:09:14 GMT

Hello,

One first example could be the fact that APs by default are not configured for any syslog server and they will just broadcast syslog messages on the same subnet.

If using too many APs on the same subnet as the management interface, this could create extra traffic load hitting the WLC.

Also, by keeping the management IP of the WLC on a different subnet from the APs, you may be able to implement more granular security policies in terms of access to the devices for example.

Regards,

Fede

If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Re: IP addressing

zhenningx — Wed, 05 Jan 2011 03:05:28 GMT

If you configure APs and WLC management IPs in the same subnet, the APs won't be able to join the WLC as layer 2 CAPWAP mode is no longer supported:

http://www.cisco.com/en/US/customer/docs/wireless/controller/7.0/configuration/guide/c70ovrv.html#wp1069102

Zhenning

Re: IP addressing

Leo Laohoo — Wed, 05 Jan 2011 03:31:52 GMT

it is a best practice to choose the management IPs of the AP in one subnet and the management IPs of the controllers in another subnet.

Whoever in management said this needs to read the deployment guide. Cisco recommends the Management IP address and the AP-Manager IP address to be IN THE SAME SUBNET.

Re: IP addressing

Leo Laohoo — Wed, 05 Jan 2011 08:31:05 GMT

Thanks for the ratings.