topic Re: 1142N Regulatory Domain in Wireless

1142N Regulatory Domain

brodierad — Sun, 04 Jul 2021 01:53:42 GMT

Hi,

Can someone please confirm which model 1142N APs I need to buy to operate in Australia with 4404 WLCs please? From what I can tell I need model AIR-LAP1142N-N-K9, is this correct? We're still running pre-CAPWAP v4.2.x.x software on the WLCs by the way.

Thank you.

Brodie

Re: 1142N Regulatory Domain

Rob Huffman — Thu, 17 Jun 2010 12:58:52 GMT

Hi Brodie,

N - is most correct my friend

Wireless LAN Compliance Status

http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/product_data_sheet0900aecd80537b6a_ps6087_Products_Data_Sheet.html

Cheers!
Rob

Please support CSC Helps Haiti

https://supportforums.cisco.com/docs/DOC-8895

https://supportforums.cisco.com/docs/DOC-8727

Re: 1142N Regulatory Domain

brodierad — Fri, 18 Jun 2010 04:46:52 GMT

Thanks for the good news. When they didn't associate it crossed my mind that I may have bought over a hundred of these with the incorrect reg domain. But now I'm pretty sure I just have to upgrade the WLC software. I'll go to the v6.x assurewave software I guess.

Re: 1142N Regulatory Domain

Rob Huffman — Fri, 18 Jun 2010 12:43:55 GMT

Hi Brodie,

Good stuff

Yes, I'm sorry I missed that in your first post, but the 1140 series was not supported

in any 4.x.x.x WLC versions. I like your thinking of upgrading to the Assurewave

6.x. Make sure we check the exact upgrade path to 6.x before moving forward.

Cheers!

Rob

Re: 1142N Regulatory Domain

Leo Laohoo — Fri, 18 Jun 2010 23:26:30 GMT

Australia should be using the "N" regulatory domain. And Rob's right, 1140 is supported on the 6.X (and later) firmware.

Re: 1142N Regulatory Domain

brodierad — Mon, 21 Jun 2010 01:28:21 GMT

Yep, I'm going:

WLCs 4.2.207.0 to 6.0.196.0

WCS 4.2.128.0 to 6.0.181.0

Location App 3.1.43.0 to 6.0.101.0

Cisco Secure ACS 4.1 to 4.2

That should do it.

Cheers

Re: 1142N Regulatory Domain

Leo Laohoo — Mon, 21 Jun 2010 01:38:08 GMT

Thanks for the ratings.

By the way, firmware 7.X is now available.

Re: 1142N Regulatory Domain

brodierad — Mon, 21 Jun 2010 03:54:20 GMT

It'd take some convincing to upgrade to a new version without a ribbon.