topic Re: AP1240 problem in Wireless

AP1240 problem

kamarul83 — Sat, 03 Jul 2021 22:59:51 GMT

hi..

Do you have any idea why the radio will disable after i configure the AP1240 as workgroup bridge?

Re: AP1240 problem

andrew.prince — Mon, 09 Jun 2008 18:36:55 GMT

The below URL will give you the correct configuration setps:-

http://www.cisco.com/en/US/products/hw/wireless/ps458/products_configuration_example09186a00805b9b87.shtml

HTH.

Re: AP1240 problem

kamarul83 — Tue, 10 Jun 2008 00:56:34 GMT

First of all, thanks for your reply.

After I configured the AP1240, the software status still disabled and the hardware still down.

FYI, I have two of AP1240 and one 1300 Series Outdoor. For the AP1240, i configured as WGB and 1300 as Access Point.

Before this, all device working properly until last month. The AP1240 doesnt work but the 1300 Outdoor still working properly.

Did you have any idea what happen to my AP1240?

Re: AP1240 problem

kamarul83 — Tue, 10 Jun 2008 05:23:06 GMT

First of all, thanks for your reply.

After I configured the AP1240, the software status still disabled and the hardware still down.

FYI, I have two of AP1240 and one 1300 Series Outdoor. For the AP1240, i configured as WGB and 1300 as Access Point.

Before this, all device working properly until last month. The AP1240 doesnt work but the 1300 Outdoor still working properly.

Did you have any idea what happen to my AP1240?

Re: AP1240 problem

andrew.prince — Tue, 10 Jun 2008 07:29:09 GMT

Can you post your current config?

Re: AP1240 problem

kamarul83 — Tue, 10 Jun 2008 07:39:44 GMT

Below is the configuration that i copy for config.txt

version 12.3

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

service password-encryption

hostname ap

enable secret 5 $1$Gl9g$EL6iBO/Yfu.fskfJiY1rI.

ip subnet-zero

ip domain name m

no aaa new-model

dot11 ssid Myport

authentication open

power inline negotiation prestandard source

crypto pki trustpoint TP-self-signed-1842759256

enrollment selfsigned

subject-name cn=IOS-Self-Signed-Certificate-1842759256

revocation-check none

rsakeypair TP-self-signed-1842759256

crypto ca certificate chain TP-self-signed-1842759256

certificate self-signed 01 nvram:IOS-Self-Sig#3601.cer

username Cisco password 7 032752180500

bridge irb

interface Dot11Radio0

no ip address

no ip route-cache

ssid Myport

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0

station-role workgroup-bridge

infrastructure-client

bridge-group 1

bridge-group 1 spanning-disabled

interface Dot11Radio1

no ip address

no ip route-cache

shutdown

speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0

station-role root

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

bridge-group 1 spanning-disabled

interface FastEthernet0

no ip address

no ip route-cache

duplex auto

speed auto

bridge-group 1

bridge-group 1 spanning-disabled

hold-queue 160 in

interface BVI1

ip address 192.168.1.134 255.255.255.0

no ip route-cache

ip http server

no ip http secure-server

ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag

control-plane

bridge 1 route ip

line con 0

line vty 0 4

end

Re: AP1240 problem

andrew.prince — Tue, 10 Jun 2008 07:42:54 GMT

Is this your current config?

Re: AP1240 problem

andrew.prince — Tue, 10 Jun 2008 07:59:38 GMT

I have checked you config - try the below:-

dot11 ssid Myport

infrastructure-ssid optional

infrastructure-ssid

then

inteface dot11radio0

no shut

test and post results?

Re: AP1240 problem

kamarul83 — Tue, 10 Jun 2008 08:11:37 GMT

I'm sorry. I'm not really understand. Could you please explain it to me?

Re: AP1240 problem

kamarul83 — Tue, 10 Jun 2008 08:15:47 GMT

I'm sorry. What do you mean Interface dot11radio0 no shut?

Re: AP1240 problem

andrew.prince — Tue, 10 Jun 2008 08:19:26 GMT

The wireless radio interface is current closed. To open the radio interface so wireless works - you must open it:- no shutdown is the command.

Re: AP1240 problem

kamarul83 — Tue, 10 Jun 2008 08:30:44 GMT

I've already select enable for the radio but the radio still =disable/down.

Below is the config;-

version 12.3

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

service password-encryption

hostname ap

enable secret 5 $1$Gl9g$EL6iBO/Yfu.fskfJiY1rI.

ip subnet-zero

ip domain name m

no aaa new-model

dot11 ssid Myport

authentication open

power inline negotiation prestandard source

crypto pki trustpoint TP-self-signed-1842759256

enrollment selfsigned

subject-name cn=IOS-Self-Signed-Certificate-1842759256

revocation-check none

rsakeypair TP-self-signed-1842759256

crypto ca certificate chain TP-self-signed-1842759256

certificate self-signed 01 nvram:IOS-Self-Sig#3601.cer

username Cisco password 7 032752180500

bridge irb

interface Dot11Radio0

no ip address

no ip route-cache

ssid Myport

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0

station-role workgroup-bridge

infrastructure-client

bridge-group 1

bridge-group 1 spanning-disabled

interface Dot11Radio1

no ip address

no ip route-cache

shutdown

speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0

station-role root

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

bridge-group 1 spanning-disabled

interface FastEthernet0

no ip address

no ip route-cache

duplex auto

speed auto

bridge-group 1

bridge-group 1 spanning-disabled

hold-queue 160 in

interface BVI1

ip address 192.168.1.134 255.255.255.0

no ip route-cache

ip http server

no ip http secure-server

ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag

control-plane

bridge 1 route ip

line con 0

line vty 0 4

end

Re: AP1240 problem

andrew.prince — Tue, 10 Jun 2008 08:32:56 GMT

Try this:-

interface Dot11Radio0

no infrastructure-client

no shut

test - and post any information from the command line.

Re: AP1240 problem

kamarul83 — Tue, 10 Jun 2008 08:41:48 GMT

version 12.3

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

service password-encryption

hostname ap

enable secret xxx

ip subnet-zero

ip domain name m

no aaa new-model

dot11 ssid client

authentication open

power inline negotiation prestandard source

crypto pki trustpoint TP-self-signed-1842759256

enrollment selfsigned

subject-name cn=IOS-Self-Signed-Certificate-1842759256

revocation-check none

rsakeypair TP-self-signed-1842759256

crypto ca certificate chain TP-self-signed-1842759256

certificate self-signed 01 nvram:IOS-Self-Sig#3601.cer

username Cisco password xxx

bridge irb

interface Dot11Radio0

no ip address

no ip route-cache

ssid client

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0

station-role workgroup-bridge

infrastructure-client

bridge-group 1

bridge-group 1 spanning-disabled

interface Dot11Radio1

no ip address

no ip route-cache

shutdown

speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0

station-role root

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

bridge-group 1 spanning-disabled

interface FastEthernet0

no ip address

no ip route-cache

duplex auto

speed auto

bridge-group 1

bridge-group 1 spanning-disabled

hold-queue 160 in

interface BVI1

ip address 192.168.1.134 255.255.255.0

no ip route-cache

ip http server

no ip http secure-server

ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag

control-plane

bridge 1 route ip

line con 0

line vty 0 4

end

Re: AP1240 problem

andrew.prince — Tue, 10 Jun 2008 08:51:33 GMT

You have changed the SSID - WHY? and you have not REMOVED "infrastructure-client" - WHY?

Re: AP1240 problem

kamarul83 — Tue, 10 Jun 2008 09:01:13 GMT

oh. i'm sorry. i thought you want me to change the SSID. Do you mean the Client Authentication Setting?

Re: AP1240 problem

andrew.prince — Tue, 10 Jun 2008 09:04:21 GMT

Tell you what - can you post the primary's AP configuration the "root" and re-post the current 1240 ap configuration the "workgroup bridge"

I will take them into my lab and test them?

Re: AP1240 problem

kamarul83 — Tue, 10 Jun 2008 09:14:02 GMT

FYI, for the primary AP (1300 series outdoor)still on the site.

below is current 1240AP:-

version 12.3

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

service password-encryption

hostname ap

enable secret xxx.

ip subnet-zero

ip domain name m

no aaa new-model

dot11 ssid client

authentication open

power inline negotiation prestandard source

crypto pki trustpoint TP-self-signed-1842759256

enrollment selfsigned

subject-name cn=IOS-Self-Signed-Certificate-1842759256

revocation-check none

rsakeypair TP-self-signed-1842759256

crypto ca certificate chain TP-self-signed-1842759256

certificate self-signed 01 nvram:IOS-Self-Sig#3601.cer

username Cisco password 7 032752180500

bridge irb

interface Dot11Radio0

no ip address

no ip route-cache

ssid client

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0

station-role workgroup-bridge

infrastructure-client

bridge-group 1

bridge-group 1 spanning-disabled

interface Dot11Radio1

no ip address

no ip route-cache

shutdown

speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0

station-role root

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

bridge-group 1 spanning-disabled

interface FastEthernet0

no ip address

no ip route-cache

duplex auto

speed auto

bridge-group 1

bridge-group 1 spanning-disabled

hold-queue 160 in

interface BVI1

ip address 192.168.1.134 255.255.255.0

no ip route-cache

ip http server

no ip http secure-server

ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag

control-plane

bridge 1 route ip

line con 0

line vty 0 4

end

Re: AP1240 problem

andrew.prince — Tue, 10 Jun 2008 09:18:05 GMT

do you have the config for the 1300 AP? Do you know what the root SSID is configured on the 1300AP?? Without this information - this issue cannot be resolved.

Re: AP1240 problem

andrew.prince — Tue, 10 Jun 2008 09:53:28 GMT

OK - so I have been in my lab and found the following that would create the same situation that you are seeing:-

1) The radio interface on the root AP is down - then the workgroup ap radio interface would not come up.

2)The radio interface on the root AP as an ssid - then the workgroup ap radio interface has a different ssid in the radio interface, then it would not come up.

3) The radio interface on the root AP has encryption enabled - then the workgroup ap radio without the same encryption on the interface would not come up.

4) The radio interface on the root AP has encryption enabled, with a pre-shared key - then the workgroup ap radio with the same encryption but no pre-shared key on the interface would not come up.

5) The workgoup bridge AP is not close enough to the current root AP.

The above is all I could test in my lunch hour.

HTH.