topic Re: hot standby problems in Wireless https://community.cisco.com/t5/wireless/hot-standby-problems/m-p/985278#M213325 <HTML><HEAD></HEAD><BODY><P>check whether client associates with standby unit or not?. are you able to ping both AP's?</P></BODY></HTML> Fri, 09 May 2008 15:01:02 GMT 2008-05-09T15:01:02Z hot standby problems https://community.cisco.com/t5/wireless/hot-standby-problems/m-p/985277#M213324 <P>hallo,</P><P>I have 2 Air-AP1242-AG-E-K9 access point.</P><P>Cisco IOS Software, C1240 Software (C1240-K9W7-M), Version 12.3(8)JA2, RELEASE SOFTWARE (fc1.</P><P>I'm configuring one of them to be an HOT STANDBY of the other.</P><P></P><P>The HOTSTANDBY ap associates to the MAIN ap but become ACTIVE after the first timeout, but the MAIN ap works fine !!</P><P></P><P>There are little commands but it does not work !!</P><P></P><P>can you help me ?</P><P></P><P>best regards</P><P>francesco</P><P></P><P></P><P></P><P></P><P></P><P> </P><P></P> Sat, 03 Jul 2021 22:48:58 GMT https://community.cisco.com/t5/wireless/hot-standby-problems/m-p/985277#M213324 fsoffia 2021-07-03T22:48:58Z Re: hot standby problems https://community.cisco.com/t5/wireless/hot-standby-problems/m-p/985278#M213325 <HTML><HEAD></HEAD><BODY><P>check whether client associates with standby unit or not?. are you able to ping both AP's?</P></BODY></HTML> Fri, 09 May 2008 15:01:02 GMT https://community.cisco.com/t5/wireless/hot-standby-problems/m-p/985278#M213325 2008-05-09T15:01:02Z