topic Option 43 and CNR 6.2.3.1 in Wireless

Option 43 and CNR 6.2.3.1

sdbrockme — Sat, 03 Jul 2021 22:41:45 GMT

I'm having a hard time setting up option 43. The standard command in nrcmd gives the following output.

nrcmd> vendor-option

322 Feature not supported - incompatible cluster version

nrcmd> vendor-option

322 Feature not supported - incompatible cluster version

nrcmd> help vendor-option

500 - cannot open help file /opt/nwreg2/local/docs/nrcmd/vendor-option.txt

It doesn't look like vendor-option even exists on this version. It looks like the command is now 'option'.

Anybody got any ideas.

andrew.prince — Fri, 11 Apr 2008 05:54:12 GMT

You would normally add option 43 in the ip DHCP pool configuration, supply the rest of your DHCP config?

kevin_miller — Thu, 18 Sep 2008 12:28:11 GMT

Did you figure this out?? I've got the same issue. Thanks!

lfabricio — Thu, 22 Mar 2012 16:52:39 GMT

Hi sdbrockme,

Try the command option-set rather than vendor-option, like the example below:

nrcmd> option-set aironet1200 create 8-bit vendor-option-string="Cisco AP c1200"

100 Ok

Regards,

Leandro Oliveira