topic Re: Will this work? in Wireless

Will this work?

cventicinque — Sat, 03 Jul 2021 22:37:59 GMT

I have a 1100 series AP on my LAN. I have a 2511 access server on the other side of my house that is isolated from my LAN. I want to connect the 2511's ethernet port to a 350 AP in hopes that I can now access the 2511 from my LAN.

I am guessing that if I configure the same SSID and Encrytion along with IPs that are valid on my LAN subnet that it will work.

Am I wrong?

Thank you!

Re: Will this work?

Scott Fella — Tue, 01 Apr 2008 22:15:51 GMT

It should.... I used a wireless bridge to connect to my lab that I stuck in a closet:)

Re: Will this work?

cventicinque — Wed, 02 Apr 2008 16:15:29 GMT

Thank you very much.

Can anyone else please confirm if this will work.

I appreciate it!

Re: Will this work?

Scott Fella — Wed, 02 Apr 2008 16:45:22 GMT

This should help. You need a WGB or a wireless bridge that connects to a hub/switch.

http://www.cisco.com/en/US/products/hw/wireless/ps458/products_configuration_example09186a00805b9b87.shtml#configure2

Re: Will this work?

cventicinque — Thu, 03 Apr 2008 18:47:10 GMT

This is almost exactly what I need...

http://www.cisco.com/warp/public/102/ap_as_wgb1.gif

Only difference is that my Root Access Point is an 1100 and my WGB is a 350. In that diagram both WAPs are 1240s. Does anyone know if my devices offer this functionality?

Thank you VERY MUCH!

Re: Will this work?

cventicinque — Thu, 03 Apr 2008 19:08:37 GMT

I found this but, what is the difference between an access point, a wireless bridge and a workgroup bridge?

http://www.cisco.com/en/US/products/hw/wireless/ps458/products_configuration_example09186a00805b9b87.shtml#configure2

Re: Will this work?

Scott Fella — Fri, 04 Apr 2008 01:27:15 GMT

It doesn't matter what AP you have, it matters if the WGB does what you want it to do. If your 350 is a WGB, then you are in luck....

Re: Will this work?

cventicinque — Fri, 04 Apr 2008 02:57:36 GMT

It looks like I will have to do some role reversal for my APs per this info:

http://www.cisco.com/en/US/products/hw/wireless/ps441/products_qanda_item09186a0080094644.shtml#q21

Q. What Autonomous IOS APs can act as a WGB?

A. The AP1100, AP1130, AP200, AP1240, and BR1310 all support WGB mode of operation. The AP350 and the BR1400 do not support WGB.

Sort of a bummer that I will have to downgrade my LAN from 54M to 11M but, I guess I can deal with it until I find a cheap 1100.

Thanks again!