https://community.cisco.com/t5/wireless/871w-advsecurityk9-debug-problem/m-p/919222#M213580 <P>I just took the router out of the box and am getting an error in SDM. In console the dot11 sys debug is on. I turn off the debug and save the config, reload and same error. I tried write erase and same thing. The debug just won't turn off. I opened the second router and fired it up and same thing out of the box. I am having other problems with a different router but this is a setback I cant get past... thanks</P> Sat, 03 Jul 2021 21:56:04 GMT darinyoung 2021-07-03T21:56:04Z https://community.cisco.com/t5/wireless/871w-advsecurityk9-debug-problem/m-p/919222#M213580 <P>I just took the router out of the box and am getting an error in SDM. In console the dot11 sys debug is on. I turn off the debug and save the config, reload and same error. I tried write erase and same thing. The debug just won't turn off. I opened the second router and fired it up and same thing out of the box. I am having other problems with a different router but this is a setback I cant get past... thanks</P> Sat, 03 Jul 2021 21:56:04 GMT https://community.cisco.com/t5/wireless/871w-advsecurityk9-debug-problem/m-p/919222#M213580 darinyoung 2021-07-03T21:56:04Z