topic Re: Cisco 1300 in Wireless https://community.cisco.com/t5/wireless/cisco-1300/m-p/887569#M213658 <HTML><HEAD></HEAD><BODY><P>So just plug the 1300 into the Power Injector, the rj45 cable from the Power Injector into a hub or directly to the ethernet port on a laptop or desktop or does that still have to go thru a hub.</P><P></P><P>Thanks,</P><P></P><P>Lonny</P><P></P></BODY></HTML> Fri, 05 Oct 2007 19:21:59 GMT lonnylegrand99 2007-10-05T19:21:59Z Cisco 1300 https://community.cisco.com/t5/wireless/cisco-1300/m-p/887567#M213656 <P>I've used the tftpd32 application in the past to configure the Cisco 1232 AP's with an IP Address, can someone tell me if that tool works on the Cisco 1300 Bridge as well. All I want to do is put an IP address on the bridge so I can go into the GUI interface thru Windows IE. I'm not comfortable with the CLI and using HyperTerm</P><P></P><P>Thanks for the help.</P><P></P><P>Lonny</P><P></P> Sat, 03 Jul 2021 21:43:36 GMT https://community.cisco.com/t5/wireless/cisco-1300/m-p/887567#M213656 lonnylegrand99 2021-07-03T21:43:36Z Re: Cisco 1300 https://community.cisco.com/t5/wireless/cisco-1300/m-p/887568#M213657 <HTML><HEAD></HEAD><BODY><P>Lonny,</P><P>Yes, you can use it with Cisco1300 Bridge.</P><P></P><P></P><P>Regards,</P><P>~JG</P><P></P><P></P><P>Please rate helpful posts</P></BODY></HTML> Fri, 05 Oct 2007 18:52:55 GMT https://community.cisco.com/t5/wireless/cisco-1300/m-p/887568#M213657 Jagdeep Gambhir 2007-10-05T18:52:55Z Re: Cisco 1300 https://community.cisco.com/t5/wireless/cisco-1300/m-p/887569#M213658 <HTML><HEAD></HEAD><BODY><P>So just plug the 1300 into the Power Injector, the rj45 cable from the Power Injector into a hub or directly to the ethernet port on a laptop or desktop or does that still have to go thru a hub.</P><P></P><P>Thanks,</P><P></P><P>Lonny</P><P></P></BODY></HTML> Fri, 05 Oct 2007 19:21:59 GMT https://community.cisco.com/t5/wireless/cisco-1300/m-p/887569#M213658 lonnylegrand99 2007-10-05T19:21:59Z