topic Re: 1500 Questions in Wireless

1500 Questions

nkariyawasam — Sat, 03 Jul 2021 20:54:57 GMT

I am configuring point-to-multipoint outdorr W'less mesh network using 1500.

Since 1550 requires WLC ( Wireless LAn Controller ) I have configured one at central site.

Q1. Does each remote site also requires WLC at respective locations ?

Q2. Can the bridge functionality in 1500 support extending multi[pla VLAN traffic to the remote 1500 ?

Re: 1500 Questions

sakthicisco — Tue, 17 Apr 2007 07:09:54 GMT

hai sam

Iam also in the same boat.i want to configure point to multipoint outdoor using 1300....

if u hav any idea about this can share with me ,so that it wud b helpful in configuring it.

can u just tell me wat is a subscriber unit?

awaiting for ur reply...

Re: 1500 Questions

retiredmarine — Tue, 17 Apr 2007 11:27:29 GMT

a Mesh Access Point (MAP) can have an ethernet connection. so you don't have to have a wlc on each site.

try these documents http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo1500/ap1500qs.pdf

http://www.cisco.com/application/pdf/en/us/guest/netsol/ns171/c649/ccmigration_09186a008077c05d.pdf

Re: 1500 Questions

retiredmarine — Tue, 17 Apr 2007 11:35:17 GMT

If you converted your 1300 to lwapp you lose the bridging. If your ios based try this document

http://www.cisco.com/en/US/products/ps5861/products_configuration_guide_chapter09186a008021e5de.html

Re: 1500 Questions

nkariyawasam — Mon, 23 Apr 2007 08:30:14 GMT

My local MAP ( mesh Access Point ) can have WLC attached to its Ethernet port. But, how about the remote MAP ? Does it also requires another WLC connected to its Ethernet Port for the propoer operation?