topic Re: Configuring Multicell 1100 in Wireless https://community.cisco.com/t5/wireless/configuring-multicell-1100/m-p/409653#M214427 <HTML><HEAD></HEAD><BODY><P>The following are the configuration parameters:</P><P>1.SSID name: Configures a unique name per wireless VLAN </P><P>2.Default VLAN ID: Default VLAN-ID mapping on the wired side </P><P>3.Authentication types: Open, shared, and network-Extensible Authentication Protocol (EAP) types </P><P>4.Media Access Control (MAC) authentication: Under open, shared, and network-EAP </P><P>5.EAP authentication: Under open and shared authentication types </P><P>6.Maximum number of associations: Ability to limit maximum number of WLAN clients per SSID </P><P>For futher information verify the following URL:</P><P><A class="jive-link-custom" href="http://cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00801444a1.html" target="_blank">http://cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00801444a1.html</A></P></BODY></HTML> Thu, 22 Sep 2005 20:48:15 GMT thomas.chen 2005-09-22T20:48:15Z Configuring Multicell 1100 https://community.cisco.com/t5/wireless/configuring-multicell-1100/m-p/409652#M214426 <P>hi.....</P><P>requests ur help in following..</P><P></P><P>i want to configure two 1100 APs as a part of existing LAN...how i should i configure them..should it be multicell or root/repeater model users should be able to roam and get connected to the nearest AP to them while they are moving...</P><P>all helps are welcome..</P><P>regards..</P><P>shiju</P> Sun, 04 Jul 2021 18:08:14 GMT https://community.cisco.com/t5/wireless/configuring-multicell-1100/m-p/409652#M214426 shijuvjoseph 2021-07-04T18:08:14Z Re: Configuring Multicell 1100 https://community.cisco.com/t5/wireless/configuring-multicell-1100/m-p/409653#M214427 <HTML><HEAD></HEAD><BODY><P>The following are the configuration parameters:</P><P>1.SSID name: Configures a unique name per wireless VLAN </P><P>2.Default VLAN ID: Default VLAN-ID mapping on the wired side </P><P>3.Authentication types: Open, shared, and network-Extensible Authentication Protocol (EAP) types </P><P>4.Media Access Control (MAC) authentication: Under open, shared, and network-EAP </P><P>5.EAP authentication: Under open and shared authentication types </P><P>6.Maximum number of associations: Ability to limit maximum number of WLAN clients per SSID </P><P>For futher information verify the following URL:</P><P><A class="jive-link-custom" href="http://cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00801444a1.html" target="_blank">http://cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00801444a1.html</A></P></BODY></HTML> Thu, 22 Sep 2005 20:48:15 GMT https://community.cisco.com/t5/wireless/configuring-multicell-1100/m-p/409653#M214427 thomas.chen 2005-09-22T20:48:15Z