topic Re: !310 Configuration in Wireless https://community.cisco.com/t5/wireless/310-configuration/m-p/363049#M214622 <HTML><HEAD></HEAD><BODY><P>The web interface is standard ip traffic with TCP port 80. You need an IP route between the two sites. If the wireless link is the only physical link between the two sites, the answer is no.</P></BODY></HTML> Wed, 08 Dec 2004 19:50:51 GMT dixho 2004-12-08T19:50:51Z !310 Configuration https://community.cisco.com/t5/wireless/310-configuration/m-p/363048#M214621 <P>I have a 1310 bridge Unit A that is associated to unit B. I can pull up unit A from the web interface and see unit B in the associations page. Is there any way to configure unit B from the unit A side without directly connection to it?</P><P></P> Sun, 04 Jul 2021 17:14:33 GMT https://community.cisco.com/t5/wireless/310-configuration/m-p/363048#M214621 cmc 2021-07-04T17:14:33Z Re: !310 Configuration https://community.cisco.com/t5/wireless/310-configuration/m-p/363049#M214622 <HTML><HEAD></HEAD><BODY><P>The web interface is standard ip traffic with TCP port 80. You need an IP route between the two sites. If the wireless link is the only physical link between the two sites, the answer is no.</P></BODY></HTML> Wed, 08 Dec 2004 19:50:51 GMT https://community.cisco.com/t5/wireless/310-configuration/m-p/363049#M214622 dixho 2004-12-08T19:50:51Z