LOST TO SOURCE LOST TO TARGET

per-johan-skansen-loe — Sun, 04 Jul 2021 17:03:44 GMT

I have a client adapter cisco aironet 350.

My problem is that I can not use my IP-phone because of LOST TO TARGET. From time to time I got that nearly half of the packets dissapears (LOST TO TARGET) and this gives extremely long ping-times.

The phone is not confident with ping-times over about 90ms.

So,- now comes the peculiar thing:

I upgraded my client adapter from cisco.com and I now have the newest version, and newest firmware.(AT least I think that)

Version: 6.01

Firmware: V5.41

NDIS driver: V8.5.26

I got the same amount of lost packet,- but now it is LOST TO SOURCE instead of lost to target.

This turn the problem oppsite down. I thought the packets were lost outgoing from my client adapter, but if it is LOST TO SOURCE it is packet from the link to me.

Someone out there who can tell me what is correct??

Re: LOST TO SOURCE LOST TO TARGET

sbilgi — Mon, 18 Oct 2004 19:00:29 GMT

Check if you are hitting the known issue CSCdx60103 .

Re: LOST TO SOURCE LOST TO TARGET

per-johan-skansen-loe — Tue, 19 Oct 2004 07:26:44 GMT

Bip, bip

SBILGI!

I have searched threw the entire forum, the cisco.com, and the technical documentation, but not got any hit at cscdx60103.

So could you please tell me where I can find some details about it.

topic LOST TO SOURCE LOST TO TARGET in Wireless

LOST TO SOURCE LOST TO TARGET

Re: LOST TO SOURCE LOST TO TARGET

Re: LOST TO SOURCE LOST TO TARGET