topic Re: Increasing Failed Packets in Wireless https://community.cisco.com/t5/wireless/increasing-failed-packets/m-p/147904#M214972 <HTML><HEAD></HEAD><BODY><P>Try resetting the bridges to factory defaults and reconfiguring them as sometimes the configuration can be corrupted. If you are not on 12.03T and the resetting does not work, try upgrading the firmware.</P></BODY></HTML> Mon, 18 Aug 2003 13:56:04 GMT kmarrero 2003-08-18T13:56:04Z Increasing Failed Packets https://community.cisco.com/t5/wireless/increasing-failed-packets/m-p/147903#M214971 <P>Hi, we got an increasing amount of this error messages on our bridges in the last time.</P><P></P><P>Warning Failed to Send Packet on port "awc0" (error=0x00000041) </P><P></P><P>Any known issues?</P><P>In the Cisco documentation there is recommended action = none.</P><P>But the amount is increasing.</P><P></P><P></P> Sun, 04 Jul 2021 15:56:34 GMT https://community.cisco.com/t5/wireless/increasing-failed-packets/m-p/147903#M214971 asarkany 2021-07-04T15:56:34Z Re: Increasing Failed Packets https://community.cisco.com/t5/wireless/increasing-failed-packets/m-p/147904#M214972 <HTML><HEAD></HEAD><BODY><P>Try resetting the bridges to factory defaults and reconfiguring them as sometimes the configuration can be corrupted. If you are not on 12.03T and the resetting does not work, try upgrading the firmware.</P></BODY></HTML> Mon, 18 Aug 2003 13:56:04 GMT https://community.cisco.com/t5/wireless/increasing-failed-packets/m-p/147904#M214972 kmarrero 2003-08-18T13:56:04Z