topic testing DRAM in Wireless

testing DRAM

vitanc — Mon, 05 Jul 2021 06:29:14 GMT

Everytime I turn "ON" the AP-350 the access point is testing the DRAM and stops there.

1) If I hit the <ESC> key the AP boots normally.

2) If I <DO NOT HIT THE "ESC" KEY> it tests the flollowing

a) first is checking memory alocation per hex address

b) second step is going into the menu where you select

"c - Copy File; u - Upload file; and so on

Please let me know what to do to get the AP out of the setup mode.

Thank you

Re: testing DRAM

ssoberlik — Fri, 01 Nov 2002 15:35:07 GMT

Every time you power up the Access Point it is going to go through the boot up process and check the memory and the other functions. The only way to not have the AP go through the systems check is to do what you have done and hit the "ESC" key.

Re: testing DRAM

vitanc — Thu, 07 Nov 2002 13:53:15 GMT

can we fix this problem?

I will be mounting this AP-350 on a conference room and I will not be able to go in it and attach a console cable everytime.

Pluse users reguraly disconnect the ethernet cable going from the monument to the AP-350 and plug it on their LAPTOPS (the power supply for the AP-350 is located in the closed, from the closed I run a cable to the moument in the Conference room, where I connect my AP-350). Thank you