topic Re: WLC 5520 Country-Code in Wireless

WLC 5520 Country-Code

sforster123 — Mon, 05 Jul 2021 18:39:53 GMT

Hi Comunity, i've got a little topic with a 5520 / IOS 8.3.133.0: Menu Wireless - Coutry: 36 countrys are enabled: AR, AT, BE, BO, BR, CH, CL, CN, CO, CZ, DE, DK, ES, FR, GB, GR, HR, HU, IN, IT, LI, LU, MX, NL, PA, PE, PL, PT, RO, SE, SK, TH, TR, UA, VE, ZA But just 27 are selectable on an AccessPoint Config Menu. Not at the end, not on the beginning of alphabetic order. For exaple i miss AR, BO, BR, CO, PE... Testet with Internet Explorer 11; Chrome 62 and Ice-Dragon 65. Any Ideas? BR Siggi

Re: WLC 5520 Country-Code

Mark Elsen — Fri, 07 Feb 2020 09:25:11 GMT

- Just use one country code for your AP and controller , probably the country you are in.

Re: WLC 5520 Country-Code

sforster123 — Fri, 07 Feb 2020 10:02:37 GMT

HI Marce, thx for your reply. i manage from germany AccessPoints international. China, India, Europe, South america, africa... We buy them all over, not just the eupean version. For example it's not possible to run a asian AP (regulatory domain) with an country code of Europe. Change the CC changes the frequencies and chanels to the local rules for US, Europe and Japan. Maybe it's an option to use one CC for each continent as workaround. BR Siggi

Re: WLC 5520 Country-Code

Sandeep Choudhary — Fri, 07 Feb 2020 11:36:20 GMT

Hi,

from Release 8.2 onwards, you can configure up to 110 country codes per Cisco WLC. This multiple-country support enables you to manage access points in various countries from a single Cisco WLC.

what exact error oyu are getting while enabling the rest of the country codes ?

Regards

Dont forget to rate helpful posts

Re: WLC 5520 Country-Code

sforster123 — Fri, 07 Feb 2020 11:45:39 GMT

Hi, I'm running IOS 8.3.133. There is not an Error, some CC are not selectable on the Advance-page of the AccessPoint. please have a look to the attatchments!

Re: WLC 5520 Country-Code

Scott Fella — Fri, 07 Feb 2020 12:16:26 GMT

Typically you purchase the ap for the country the ap will be installed during the purchase using a specific sku. Now if this is a universal sku access point, not every country allows that and thus why you don’t have all the choices.

Re: WLC 5520 Country-Code

patoberli — Fri, 07 Feb 2020 15:29:27 GMT

This is a -E AP, so it only supports the European (and few other) countries. Is one of those missing?