topic Hello Rasika, in Wireless

2802I not discovered by PI 2.1

Nico Bellack — Mon, 05 Jul 2021 14:21:42 GMT

hello,

a customer uses PI 2.1, WLC 2504 8.2.151.0 and AP 3502I and 2602I.

Now he bought an AP 2802I. after upgrading the WLC to 8.2. the AP works fine.

But the AP is not discovered by the PI. In PI in the Audit Status of the WLC the AP Name and Mac are detected, but the Status is "In Downloading State".

Is it necessary, that PI also supports AP Types which are discovered via WLC? Which PI Version is needed? 3.1?

thx for help

Nico

Hi

Rasika Nayanajith — Wed, 19 Jul 2017 06:40:05 GMT

Pls refer below compatibility matrix

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html#pgfId-148422

I would suggest PI 3.2 if you have opportunity to upgrade

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-2/release/notes/cpi_rn.html

Since there is no direct upgrade path from 2.x to 3.2, I would suggest you to fresh build on 3.2 and then import maps from existing 2.1 system to new setup. Below is the PI 3.2 quick start guide for your reference

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-2/quickstart/guide/cpi_qsg.html

HTH

Rasika

*** Pls rate all useful responses ***

Hello Rasika,

Nico Bellack — Mon, 07 Aug 2017 14:07:33 GMT

Hello Rasika,

you're right. obviously we need to upgrade PI 2.1 to PI 3.2. 😞

I will talk to the customer.

thx for your help.

Nico