topic thanks Mpathira,The Software in Wireless

Compatibility

mwassawa1 — Mon, 05 Jul 2021 11:00:21 GMT

Hi,

I am using a cisco controller AIR-CT5508-K9 which supports the indoor 1242 access points. I want to purchase indoor access points as I understand that the 1242 series Access Points are coming to end off life. Kindly advise on which other model I can purchase.

Hi,Supported Access Points

mpathira — Mon, 28 Sep 2015 19:00:08 GMT

Hi,

Supported Access Points are based on the software version of the WLC, and not the WLC model. If the WLC is running version 8.0.120.0, AP-1250 would be one of your choice.

thanks Mpathira,The Software

mwassawa1 — Tue, 29 Sep 2015 05:22:21 GMT

thanks Mpathira,

The Software version of the WLC is 7.0.98.0 . will it still work with the 1250-AP?

Hi,1242 AP last support is 8

Sandeep Choudhary — Tue, 29 Sep 2015 06:48:28 GMT

Hi,

1242 AP last support is 8.0.x.

I will say either use 2602 or 2702 AP, but these AP need minimum 7.2.110.0 and 7.6.120.0 respectively.

Check here for more compatibility information: http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

Regards

Don't forget to rate helpful posts

Refer the link for

mohanak — Tue, 29 Sep 2015 09:04:22 GMT

Refer the link for Replacement product for 1242 : http://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/unified-ip-phone-7900-series/end_of_life_notice_c51-726425.html

End of Service Contract Renewal Date: HW	The last date to extend or renew a service contract for the product.	October 21, 2017
Last Date of Support: HW	The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete.	July 31, 2018