topic Hi,In ISE you have option to in Wireless

5508 guest lifetime

sprocket10 — Mon, 05 Jul 2021 09:47:38 GMT

We have receptionists using the Guest management portal to setup accounts for visitors. They keep setting up users with long lifetimes. Is it possible to set this so they can only set a maximum of 1 day?

Which guest management portal

Sandeep Choudhary — Wed, 25 Mar 2015 10:41:43 GMT

Which guest management portal r u using ?

by ISE sponsor portal you can set that easily to one day to 1 year.

Regards

Dont forget to rate helpful posts

HiThe receptionists log onto

sprocket10 — Wed, 25 Mar 2015 10:47:17 GMT

The receptionists log onto the 5508 as a user setup for lobbyadmin

Hi ,There is a option to set

Sandeep Choudhary — Wed, 25 Mar 2015 10:53:49 GMT

Hi ,

There is a option to set lifetime of 1 day or more.

check the attached screenshot:

Regards

Don't forget to rate helpful posts

sorry, please read my first

sprocket10 — Wed, 25 Mar 2015 11:02:01 GMT

sorry, please read my first post.

"They keep setting up users with long lifetimes. Is it possible to set this so they can only set a maximum of 1 day?"

If the receptionist enters 31 days, they get the below error, but I want this to happen if they try 2 days

___________________________ERRORS ____________________________

days : 31 : is an invalid value. Valid range is 0 <> 30

Make the necessary corrections and try again

Hi,this is not possible on

Sandeep Choudhary — Wed, 25 Mar 2015 11:35:18 GMT

Hi,

this is not possible on WLC to set max to 2 days.

you have to use ISE sponsor portal to achieve this.

Regards

Hi,In ISE you have option to

abwahid — Thu, 09 Apr 2015 06:22:20 GMT

Hi,

In ISE you have option to configure different time profile (as you want ) and call that profile while creating / setting up an account for visitors.

Go through the below link for configuration help.

http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/upgrade_guide/b_ise_upgrade_guide_13/b_ise_upgrade_guide_13_chapter_0101.html

Using WLC 5508 GUI. Disable

gohussai — Thu, 16 Apr 2015 21:33:36 GMT

Using WLC 5508 GUI.

Disable under the WLAN advance tab the session
time out option since this is used only when working with layer 2 authentication
like WPA PSK or WEP, and then under the controller tab set the client idle time
out the 0 for infinite or the requested time.

Hope this will be helpful ,do mark the answer correct if its helpful.