topic Yes in Wireless https://community.cisco.com/t5/wireless/yes/m-p/2461199#M217474 <P>Is there a way to configure a 2600 AP without a console cable and a controller to set the IP address first?</P> Mon, 05 Jul 2021 07:39:48 GMT QuikTrac1 2021-07-05T07:39:48Z Yes https://community.cisco.com/t5/wireless/yes/m-p/2461199#M217474 <P>Is there a way to configure a 2600 AP without a console cable and a controller to set the IP address first?</P> Mon, 05 Jul 2021 07:39:48 GMT https://community.cisco.com/t5/wireless/yes/m-p/2461199#M217474 QuikTrac1 2021-07-05T07:39:48Z No it is not possible, in https://community.cisco.com/t5/wireless/yes/m-p/2461200#M217475 <P>No it is not possible, in order to configure 2600 AP locally , for first time, you need to assign IP through console. Once it gains static IP, you can later on access other modes like GUI and Telnet.</P> Fri, 11 Apr 2014 08:29:32 GMT https://community.cisco.com/t5/wireless/yes/m-p/2461200#M217475 Saurav Lodh 2014-04-11T08:29:32Z