topic Config network broadcast in Wireless

Config network broadcast

Felipe Agudo — Mon, 05 Jul 2021 07:03:52 GMT

Hello,

I know that I can enable Broadcast in the WLC using CLI( config network broadcast enable ). Can I do it in the Web Interface?

Regards.

Sandeep Choudhary — Wed, 29 Jan 2014 11:30:47 GMT

yes you can do it .

WLAN > Click on WLAN ID > General > then check the box for broadcast.

Regards

Dont forget to rate helpful posts

Felipe Agudo — Wed, 29 Jan 2014 11:40:13 GMT

I think that you don't understand my question.

The answer you give me corresponds to the following command:

config wlan broadcast-ssid enable

The command that I'm referring to is :

config network broadcast enable

Regards

Sandeep Choudhary — Wed, 29 Jan 2014 11:47:05 GMT

HI,

Ok now I got ur point.

Here is the GUI Procedure to do it .

Controller > General > enable the Broadcasting forwarding

Here is the screenshot:

Regards

DONt forget to rate helpful posts

Felipe Agudo — Wed, 29 Jan 2014 11:57:30 GMT

Correct Answer

Thank you!