topic Re: Load Profile Failed in Wireless

Load Profile Failed

goncalo.girao — Sun, 04 Jul 2021 07:01:57 GMT

Last week one of our 9 APs (1140) wasnt able to accept connections. I rebooted the AP and again all worked. But on my debug I found this (and again today) (attached image)

Re: Load Profile Failed

Scott Fella — Mon, 06 May 2013 17:54:14 GMT

That is a threshold setting that can be adjusted. Doesn't affect client connectivity. If your on v7.4 with 1142's then you can be running into a known bug.

Sent from Cisco Technical Support iPhone App

Re: Load Profile Failed

Scott Fella — Mon, 06 May 2013 17:59:04 GMT

Here is the bug ID just in case your using v7.4

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCud97983

Sent from Cisco Technical Support iPhone App

Re: Load Profile Failed

goncalo.girao — Mon, 06 May 2013 18:02:05 GMT

This is my version

BTW Do you suggest upgrade firmware?

Re: Load Profile Failed

Scott Fella — Mon, 06 May 2013 18:07:30 GMT

Well you can, but I would just go with the latest version on the 7.0 train which is v7.0.240.0. Make sure that client load balancing is disabled also.

Sent from Cisco Technical Support iPhone App

Re: Load Profile Failed

Scott Fella — Mon, 06 May 2013 18:13:15 GMT

You can run this command on a given ap to see the utilization

show ap auto-rf {802.11a | 802.11b} Cisco_AP

Sent from Cisco Technical Support iPhone App

Re: Load Profile Failed

goncalo.girao — Mon, 06 May 2013 18:14:00 GMT

Yes it is 🙂

TYou

Re: Load Profile Failed

Scott Fella — Mon, 06 May 2013 18:16:09 GMT

Then keep track to see if its a given AP or not. Can be an issue with an AP, especially if a reboot of the AP fixes it. You can try swapping APs around to see if the issue follows the AP or not.

Sent from Cisco Technical Support iPhone App