topic Re: PORT CHANNEL ISSUE in Wireless

PORT CHANNEL ISSUE

khurram1987 — Sun, 04 Jul 2021 06:56:44 GMT

i have WLC 4400 series and i have configured port channel its four ports with my core.problem is when i apply port chanel on it it turns down and core log shows that

extende: %EC-SP-5-CANNOT_BUNDLE2: Gi2/6 is not compatible with Po5 and will be suspended (vlan mask is different

my mode on core is auto and in wlc its also auto

can you please solve my problem..

thanks

PORT CHANNEL ISSUE

Leo Laohoo — Sat, 20 Apr 2013 06:19:05 GMT

Post the config of PO5 as well as the config of Gi2/6.

Re: PORT CHANNEL ISSUE

Scott Fella — Sat, 20 Apr 2013 10:20:49 GMT

The mode should be 'ON'

channel-group 5 mode on

Ethernet load balancing should be src-dst-ip

show etherchannel load-balance
port-channel load-balance src-dst-ip

Sent from Cisco Technical Support iPhone App

PORT CHANNEL ISSUE

khurram1987 — Sun, 21 Apr 2013 08:54:42 GMT

Fella thanks for your suggestion ...tell me what mode should be on WLC...??

current is AUTO....

PORT CHANNEL ISSUE

Yahya Jaber — Sun, 21 Apr 2013 09:10:15 GMT

On WLC, just enable LAG.

on the switch, as Scott said.