topic how to enable accounting on 7500? in Wireless

how to enable accounting on 7500?

matantal.il — Sun, 04 Jul 2021 06:45:51 GMT

hi,

it seems there is no option for flexconnect registered AP's to work with external accounting server.

I am using zeroshell server to authenticate with the radius server,which works perfectly!

but there is no option under flexconnect security group to specify accounting server.

is there a way to redierct AP to a local acoouting+authentication radius ?

Re: how to enable accounting on 7500?

Shaoqin Li — Thu, 21 Mar 2013 16:08:43 GMT

per 7.4 config guide,
http://www.cisco.com/en/US/docs/wireless/controller/7.4/configuration/guides/flexconnect/config_flexconnect_chapter_01.html

Note
Only the Session Timeout RADIUS attribute is supported in standalone mode. All other attributes as well as RADIUS accounting are not supported.

so if central auth it should be fine.

Sent from Cisco Technical Support iPad App

Re: how to enable accounting on 7500?

matantal.il — Thu, 21 Mar 2013 16:48:31 GMT

hi shaoqin,

thanks for the fast reply.

i must understand, it means i cant direct accounting for local radius on remote site?

what do you mean by central auth?

thanks in adavnced

Re: how to enable accounting on 7500?

Shaoqin Li — Thu, 21 Mar 2013 17:05:21 GMT

you can use 'central auth, local switching', neans auth traffic will be sent back to wlc but traffic gets switched locally.

Sent from Cisco Technical Support iPhone App

Re: how to enable accounting on 7500?

matantal.il — Thu, 21 Mar 2013 22:38:29 GMT

the thing is that my radius+accounting server is not reachable from controller.

can you think of other solution?

thanks a lot for the help though

Re: how to enable accounting on 7500?

Shaoqin Li — Fri, 22 Mar 2013 16:42:06 GMT

flexconnect backup radius accounting currently is not supported as per config guide...

Sent from Cisco Technical Support iPad App