topic WLC5508 with SW6500 VSS mode in Wireless

WLC5508 with SW6500 VSS mode

nicolas.chabalier — Sun, 04 Jul 2021 05:45:46 GMT

Hi all,

Unfortunatelly, I haven't enough experience on CISCO wireless controller and I'm not able to find an official answer for this question:

My customer has two SW6500 on VSS mode connected via VSL. I wish to know if anyone have already connected WLC5508 with SW6500 VSS using LAG feature ?

I wish to connect one uplink from LAG to the first switch and the second uplink to the other. The two switches are considered like one logical software.

I have already read the best practice from CISCO when we connect a 5508 to a switch regarding the port-channel but nothing regarding VSS and VSL link.

Thanks in advance.

WLC5508 with SW6500 VSS mode

Scott Fella — Wed, 03 Oct 2012 20:47:01 GMT

It does work as long as the two chassis are in vss:) Make sure the the etherchannel load balancing is configured for src--dst-ip

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

WLC5508 with SW6500 VSS mode

nicolas.chabalier — Thu, 04 Oct 2012 20:44:18 GMT

Thanks in advance,

Installation done today, works perfectly.

WLC5508 with SW6500 VSS mode

Scott Fella — Thu, 04 Oct 2012 23:18:41 GMT

Good news and thanks for using the rating system!

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"