topic Re: Windows 2008 R2 Radius configuration issue.. in Wireless

Windows 2008 R2 Radius configuration issue..

kumar.networld — Sun, 04 Jul 2021 04:46:03 GMT

Hello Support Team,

I have a Windows 2008 R2 server, i want to configured NPS (Radius) Server on windows 2008 server for WLC client and AD users autentication.

I am tried to configured but failed. AD users are not autenticated.

have you any guide for windows Radius configutation please share.

Re: Windows 2008 R2 Radius configuration issue..

Scott Fella — Sat, 10 Mar 2012 13:16:35 GMT

Take a look at this guide.

EDIT: Sorry bad cut n paste

http://communities.intel.com/servlet/JiveServlet/previewBody/4321-102-1-7037/SImple%20NPS%20Configuration%20as%20Radius%20Part%201.pdf

HTH

Thanks,

Scott Fella

Sent from my iPhone

Re: Windows 2008 R2 Radius configuration issue..

kumar.networld — Sun, 11 Mar 2012 06:08:39 GMT

Thankx for the reply Scott.

But this not my answer..

Thanks,

Chandan

Re: Windows 2008 R2 Radius configuration issue..

Scott Fella — Sun, 11 Mar 2012 11:41:35 GMT

I edited the other post since I pasted the wrong link. You can also look at any IAS configuration because they are pretty close as to the policy configuration.

http://www.microsoft.com/download/en/details.aspx?id=8089

Thanks,

Scott Fella

Sent from my iPhone

Windows 2008 R2 Radius configuration issue..

Salvador Antonio Quintanilla Mendoza — Mon, 06 May 2013 22:14:28 GMT

Did you find the requested guide??? (step by step configuration of the windows server 2008 and the wlc)

Windows 2008 R2 Radius configuration issue..

Scott Fella — Tue, 07 May 2013 02:05:24 GMT

How about this

http://araihan.wordpress.com/2010/04/30/complete-guide-to-build-a-cisco-wireless-infrastructure-using-cisco-wlc-5500-cisco-1142-ap-and-microsoft-radius-server/

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

Windows 2008 R2 Radius configuration issue..

Jatin Katyal — Tue, 07 May 2013 15:12:21 GMT

Could you provide me the error from the NPS > event viewer? The error message would point us in the right direction.

Jatin Katyal

- Do rate helpful posts -

Windows 2008 R2 Radius configuration issue..

David Watkins — Tue, 07 May 2013 17:54:49 GMT

I just added this last week. I think there are some similar Docs out there on the internets, but this should take you top to bottom for an NPS install, including all prerequisites such as a CA, etc.

https://supportforums.cisco.com/docs/DOC-32752

As Jatin suggested, if you have any errors on NPS you can share, it could be helpful.

It would also be helpful to collect a client debug to "verify" whether we are communicating properly with the RADIUS server or just being "rejected".

From the WLC CLI, start the following for a test client. Then connect and attempt to authenticate with the AD credentials. Post the collect outptus back here.

>debug client

Windows 2008 R2 Radius configuration issue..

Jatin Katyal — Wed, 08 May 2013 01:19:49 GMT

yep, that's how we can filter out the client specific debugs and see what exactly radius returning...

fyi, here is a path you need to look out for NPS error.

go to NPS > administrative tools > event viewer > Custom views > server roles > network policy and access-services.

Jatin Katyal

- Do rate helpful posts -

Re:Windows 2008 R2 Radius configuration issue..

umar bhatti — Thu, 09 May 2013 06:02:40 GMT

Hi i done similar in past are you still having the issue or is it fixed

Sent from Cisco Technical Support Android App