topic Wired guest network in Wireless

Wired guest network

Adam Watts — Sun, 04 Jul 2021 04:45:24 GMT

A quick question,

Do i need a anchor controller in order to make a guest network work?

I need to be able to authenticate users on a wired network before they are allowed assess onto our network.

i've set up a similar system on our Internet guest network and it works well. that uses a remote anchor controller on our dmz. For this scenario we don't need a remote anchor as we want to put it onto a vlan on our main network.

Any ideas we would be using the on site 5508 controllers hopfully to implement this solution.

Many thanks,

Adam

Wired guest network

Stephen Rodriguez — Thu, 08 Mar 2012 17:20:35 GMT

No an anchor controller is not 'required' to do either Wireless or Wired guest access via the WLC.

Having the anchor is 'best practice' as you are forcing these untrusted devices outside of your LAN.

5508 should work for this like a champ.

Steve

Wired guest network

Adam Watts — Fri, 09 Mar 2012 11:07:32 GMT

Thanks for that Steve,

I'll have a play and see what i can do.

Adam

Wired guest network

Adam Watts — Wed, 14 Mar 2012 09:21:20 GMT

Hi Steve,

set it up yesterday and was one of the easiest setups i've done in a while. works a treat.

Adam