topic Re: Web-browser only display Summary Status and no menu for conf in Wireless

Web-browser only display Summary Status and no menu for configing

Totardo Tobing — Sun, 04 Jul 2021 04:23:26 GMT

Guys,

I have 4 Cisco Aironet 1140. I open a web browser IE 8 and type their address "http://<ip address>". Then I enter my username and password in the browser and successfully login to the access point.

But, There is something strange, why I only see Summary status of my access point after the login process success??? I can't config anything...

I add a new username and use highest privilage, but the result still the same. Same unusual web display, only displaying summary status of the access point, I can't config ssid, vlan, etc.

Here's my configuration:

username Zicco privilege 15 password 7 123A551A02055F106B

username Bl4st privilege 15 secret 5 $1$UJom$UoNBR07HmSGXdoxTUR1W40

ip http server

ip http authentication local

no ip http secure-server

Is there any configuration command that must be added? Please help me.

Thank you

Re: Web-browser only display Summary Status and no menu for conf

Stephen Rodriguez — Tue, 17 Jan 2012 04:30:20 GMT

what is the model of the AP? Is it a Ap1142 or an LAP1142?

Sent from Cisco Technical Support iPhone App

Web-browser only display Summary Status and no menu for configin

Totardo Tobing — Tue, 17 Jan 2012 04:35:51 GMT

Hey thanks for fast respond

they are cisco AIR-AP1141N-E-K9

They are still autonomous access point

Web-browser only display Summary Status and no menu for configin

George Stefanick — Tue, 17 Jan 2012 04:39:19 GMT

can you post the entire config, im curiuos...

Re: Web-browser only display Summary Status and no menu for conf

Scott Fella — Tue, 17 Jan 2012 04:41:39 GMT

I'd like to see a screen shot if possible just to see:)

Thanks,

Scott Fella

Sent from my iPhone

Re: Web-browser only display Summary Status and no menu for conf

Totardo Tobing — Tue, 17 Jan 2012 05:03:14 GMT

Guys, here's the screen shoot:

Cisco Aironet 1140 Series Access Point, Hostname, Home Summary Status and only contain 3 link: Network Identity, Network Interface and Event Log. No more than that.

I cant find config menu like create SSID, create security type, etc that I want.

Here's my running-config and screen shot. (attached)

Re: Web-browser only display Summary Status and no menu for conf

Scott Fella — Tue, 17 Jan 2012 05:10:19 GMT

Doesn't seem like you are getting the correct privilege level.

Re: Web-browser only display Summary Status and no menu for conf

George Stefanick — Tue, 17 Jan 2012 05:13:46 GMT

Are you using this user username to access the GUI or the other one?

Re: Web-browser only display Summary Status and no menu for conf

Scott Fella — Tue, 17 Jan 2012 05:17:41 GMT

Like George mentioned, compnet is the one you need to use, not gajahtunggal unless you add privilege 15 to that username.

Re: Web-browser only display Summary Status and no menu for conf

Totardo Tobing — Tue, 17 Jan 2012 05:46:06 GMT

Yes. Only the compnet username is able successfuly log in to the web.

But still, even I use compnet username, I only get that kind of Web display that I showed. Not like the GUI I used to see when I configure out-of-box access point.

Re: Web-browser only display Summary Status and no menu for conf

George Stefanick — Tue, 17 Jan 2012 06:16:13 GMT

Doesnt make much sense ... Have you tried a different browser ?

Re: Web-browser only display Summary Status and no menu for conf

Totardo Tobing — Tue, 17 Jan 2012 07:51:52 GMT

Not yet. I'm only trying IE version 8. Is this a matter of browser?

Re: Web-browser only display Summary Status and no menu for conf

George Stefanick — Tue, 17 Jan 2012 07:56:00 GMT

I wouldnt think so ... But your config looks good .. I would try another browser for giggles.

Re: Web-browser only display Summary Status and no menu for conf

Totardo Tobing — Tue, 17 Jan 2012 10:08:21 GMT

Okay, I will try it with another browser. May be it's just because of browser. I hope so. Thank you George. I will write down what was the problem latter after we able to resolve it, particulary if it just because of browser.

Re: Web-browser only display Summary Status and no menu for conf

Totardo Tobing — Wed, 18 Jan 2012 08:20:53 GMT

Hi George, today we solved the problem. With adding this command: "config(terminal)#ip http authentication local" all of 5 access points now able to managed via web browser.

Sometimes, we can use access point's web browser without adding this command. But in my cases, only using command of"ip http server" isn't enough. You must add "ip http authentication local" command to your configuration. I dont know why.

And we must have at least one: username <username> privil 15 pass <password> that is full privileged user to use as username and password logon in your access point browser. Otherwise we can't logon to our access point.

Thank you George, I appreciate your kindness. Regards