topic Archive Command Question in Wireless

Archive Command Question

Patrick McHenry — Sun, 04 Jul 2021 03:49:31 GMT

Hi,

I've been configuring the archive command on all the switches and routers in the enviroment. I really like this way of saving configs. As soon as I write mem, it is saved right to a file. Is there a way to configure it on the controllers? I tried: "archive" and it just says unrecognized.

Thanks, Pat.

Re: Archive Command Question

Stephen Rodriguez — Mon, 26 Sep 2011 18:48:04 GMT

On the WLC, the command is save config, and is saved as a XML file by default. Granted you can't see this directly in the AireOS, you have to do an upload of the config to get it.

HTH,

Steve

Archive Command Question

Patrick McHenry — Mon, 26 Sep 2011 19:51:34 GMT

Thanks for the response. I know that the save command is different on the WLC and I can up load a config by going to command then upload, put in all the info and the upload it but, that being said, is there a way to configure the switch to automatically copy a config to a tftp server after I issue the save config command? Or, when I am in the GUI and click the save configuration?

Thanks, Pat.

Archive Command Question

Stephen Rodriguez — Mon, 26 Sep 2011 20:03:18 GMT

not to my knowledge. About the best I can think of would be either a shell or expect script to issue the commands and then upload to a server.