topic Re: AirMagnet Planner in Wireless

AirMagnet Planner

Jason Aarons — Sun, 04 Jul 2021 03:14:01 GMT

I have the latest AirMagnet Planner and don’t see the Cisco 3502i APs listed. Wondering AirMagnet what antenna should I use?

Re: AirMagnet Planner

Leo Laohoo — Mon, 23 May 2011 00:55:05 GMT

Maybe broadcast SSID is not enabled or the radios are turned off?

The 3500 are running autonomous IOS?

Re: AirMagnet Planner

Jason Aarons — Mon, 23 May 2011 00:57:21 GMT

I think your confused I'm running Planner, this is where you place APs on a floor plan and predict coverage. Only the Cisco 3502i isn't a available AP, wondering what others doing Predictive work are doing.

Re: AirMagnet Planner

Leo Laohoo — Mon, 23 May 2011 01:01:22 GMT

I think your confused I'm running Planner, this is where you place APs on a floor plan and predict coverage.

Yes. I'm confused. I hate Mondays.

Only the Cisco 3502i isn't a available AP, wondering what others doing Predictive work are doing.

Yes it is. Cisco has released an autonomous IOS for the3500 for wireless site survey use only. I have seen one in action.

Re: AirMagnet Planner

Leo Laohoo — Mon, 23 May 2011 01:35:47 GMT

The 3502i has two internal antennas: The 2.4Ghz is a 4 dBi gain, omni-directional and the 5.0 Ghz is a 3.0 dBi gain, omni-directional.

Re: AirMagnet Planner

Jason Aarons — Mon, 23 May 2011 01:38:54 GMT

I found in Planner a "Cisco1140, 1040, 3500 2.4 Integrated Omni 4dbi A" which is the Integrated. I was looking for Cisco 3500....