topic Re: Configuring wIPS Profiles in Wireless

Configuring wIPS Profiles

fmirza007 — Sun, 04 Jul 2021 01:11:20 GMT

Hi all, I am running a 2 MSE, 4 Controller setup, all managed by the WCS server. I am trying to configure the wIPS profile. I am able to create the profiles and when I go to apply it to the MSEs I get an error message. Each MSE has two controllers assigned to it. My question is is there something wrong with the setup? Should I send all controllers to one MSE and leave the other as a back up, or can I load balance between the two? If I can then how come WCS is not allowing me to assign a profile to both MSEs.

Any help would be greatly apreciated.

Thanks

Re: Configuring wIPS Profiles

Lucien Avramov — Fri, 23 Oct 2009 13:56:50 GMT

You can load balance and you should be able to assign the profiles to both MSE.

Can you post your wcs logs once you recreated the issue along with the screenshots?

Did you add the license correctly for the wips feature?

Have you followed:

http://www.cisco.com/en/US/docs/wireless/mse/3350/6.0/wIPS/configuration/guide/msecg_ch6_wIPS.html