topic Layer 3 Roaming in Wireless https://community.cisco.com/t5/wireless/layer-3-roaming/m-p/1253936#M219644 <P>Is there a way for a client on one autonomous AP in user vlan A to roam to second autonomous AP in user vlan B whilst retaining IP address without using WDS. So Mobile IP Layer 3 roaming possibly through the switch/router?</P><P></P><P>The two APs are connected to a 3560 which is connected to an 877. The vlans are layer 3 on the SVI of the 3560.</P> Sun, 04 Jul 2021 00:54:47 GMT mat.edwards 2021-07-04T00:54:47Z Layer 3 Roaming https://community.cisco.com/t5/wireless/layer-3-roaming/m-p/1253936#M219644 <P>Is there a way for a client on one autonomous AP in user vlan A to roam to second autonomous AP in user vlan B whilst retaining IP address without using WDS. So Mobile IP Layer 3 roaming possibly through the switch/router?</P><P></P><P>The two APs are connected to a 3560 which is connected to an 877. The vlans are layer 3 on the SVI of the 3560.</P> Sun, 04 Jul 2021 00:54:47 GMT https://community.cisco.com/t5/wireless/layer-3-roaming/m-p/1253936#M219644 mat.edwards 2021-07-04T00:54:47Z Re: Layer 3 Roaming https://community.cisco.com/t5/wireless/layer-3-roaming/m-p/1253937#M219645 <HTML><HEAD></HEAD><BODY><P>Hello Mat,</P><P></P><P>no, it's not possible without WDS. In fact, regular WDS doesn't support Layer 3 roaming, either. You need to do WDS with Cisco's 6500 WLSM module. WLSM was announced end of life in 2006.</P><P></P><P><A class="jive-link-custom" href="https://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet09186a00802252b7_ps2706_Products_Data_Sheet.html" target="_blank">https://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet09186a00802252b7_ps2706_Products_Data_Sheet.html</A></P><P></P><P>Regards,</P><P>Roman</P></BODY></HTML> Wed, 05 Aug 2009 12:18:57 GMT https://community.cisco.com/t5/wireless/layer-3-roaming/m-p/1253937#M219645 Roman Rodichev 2009-08-05T12:18:57Z