topic Re: WLSE in Wireless https://community.cisco.com/t5/wireless/wlse/m-p/1064338#M219929 <HTML><HEAD></HEAD><BODY><P>To resolve an inconsistent configuration, there are several actions to try:</P><P></P><P>It is possible that the most recent inventory failed for the device. </P><P>If the inventory is re-run, the condition may clear.</P><P>If the configuration value contested is user-editable, the problem can be corrected with the WLSE templates, the AP or BR GUI, or the AP or BR Command Line Interface (CLI).</P><P>If the configuration value contested is not user-editable, this is probably a Cisco IOS® error. In this case, the affected AP or BR must be upgraded to the most recent version of Cisco IOS.</P><P></P><P></P></BODY></HTML> Wed, 01 Oct 2008 21:37:29 GMT amritpatek 2008-10-01T21:37:29Z WLSE https://community.cisco.com/t5/wireless/wlse/m-p/1064337#M219928 <P>Hi,</P><P></P><P>we have cisco AP1131Ag which is managing through wlse1030(2.13).the wlse is showing the below fault on this access point account.Ap ios 12.4(10b)ja3.</P><P></P><P>Inconsistent device state found: Device "(divicename)": ifIndex=2, MAC=00-1e-7a-32-b3-70: "CISCO-DOT11-IF-MIB cd11IfStationConfigTable.cd11IfStationRole must be in the range [1..11] (was 0)"</P><P></P><P>pls help me to resolve this issue</P><P></P><P>regards,</P><P>subash</P> Sat, 03 Jul 2021 23:32:14 GMT https://community.cisco.com/t5/wireless/wlse/m-p/1064337#M219928 sureshkumar.a 2021-07-03T23:32:14Z Re: WLSE https://community.cisco.com/t5/wireless/wlse/m-p/1064338#M219929 <HTML><HEAD></HEAD><BODY><P>To resolve an inconsistent configuration, there are several actions to try:</P><P></P><P>It is possible that the most recent inventory failed for the device. </P><P>If the inventory is re-run, the condition may clear.</P><P>If the configuration value contested is user-editable, the problem can be corrected with the WLSE templates, the AP or BR GUI, or the AP or BR Command Line Interface (CLI).</P><P>If the configuration value contested is not user-editable, this is probably a Cisco IOS® error. In this case, the affected AP or BR must be upgraded to the most recent version of Cisco IOS.</P><P></P><P></P></BODY></HTML> Wed, 01 Oct 2008 21:37:29 GMT https://community.cisco.com/t5/wireless/wlse/m-p/1064338#M219929 amritpatek 2008-10-01T21:37:29Z