topic Re: how too ?? in Wireless

how too ??

meggerman — Sat, 03 Jul 2021 22:58:17 GMT

hi,

i have about 400 ap`s some with CDP some without, how can i apply the CDP setting to all AP`s via my WCS withouh overwriting the individual settings for each ap on antenna,channel,name,power etc..

i.e just activate that setting globally on all AP`s from WCS.

any help ?

cheers

Megz

Re: how too ??

Scott Fella — Tue, 03 Jun 2008 20:32:58 GMT

You should be able to create an access point template and just enable that feature and apply it to the ap's. All other settings will not change.

Re: how too ??

meggerman — Wed, 04 Jun 2008 07:20:35 GMT

thanks m8,

yes i had worked it out already.. i only applied CDP enabled on the tablet and applied to one controller.. the result was power and channel settings went back to auto ? but CDP was enabled.

strangley even though i have checked my WCS and WLAN for CDP settings and they have all been applied correctly.. i still get a WCS 'false' WLAN 'true' on my audit report next to CDP settings ?

any ideas ?

Re: how too ??

Scott Fella — Wed, 04 Jun 2008 09:34:23 GMT

Is cdp enabled on all th eswitchports?

Re: how too ??

meggerman — Wed, 04 Jun 2008 10:05:04 GMT

good point !

(goes and checks 🙂 )

Re: how too ??

meggerman — Wed, 04 Jun 2008 10:37:12 GMT

have checked, it is.

so im just wondering how my WCS has a different configuration from the wlan controllers 😞