topic Removing transport from line vty in Wireless

Removing transport from line vty

sholeh — Sat, 03 Jul 2021 22:23:33 GMT

Can anyone help me removing transport command from my Cisco Aironet AIR-AP1242AG-A-K9 1242 ?

I want back to the default.

I have reset it but didn't work

Thanks in advanced.

Best regards,

Slh

line con 0

transport preferred all

transport output all

line vty 0 4

transport preferred telnet

transport input telnet

transport output telnet

line vty 5 15

transport preferred none

transport input none

transport output none

end

Re: Removing transport from line vty

Scott Fella — Fri, 15 Feb 2008 13:29:49 GMT

I don't think you can. You just have to set it to all, telnet, none or ssh if available. What are you trying to acomplish by removing the transport?

Re: Removing transport from line vty

sholeh — Sat, 16 Feb 2008 04:19:48 GMT

Hi Fella,

What I want to achieve is if I want to access to this device authentication for telnet and web browser should use user tacacs

This the command I put in the setting:

aaa new-model

aaa authentication login default group tacas local

ip http server

ip http authentication aaa

ip http port 45522

every time I apply this setting to the device which has transport command as in my previous massage. my username and password from tacacs server doesn't work.

Re: Removing transport from line vty

Scott Fella — Wed, 20 Feb 2008 03:26:54 GMT

Take a look at this;

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008069593c.shtml

Re: Removing transport from line vty

sholeh — Sun, 24 Feb 2008 02:54:10 GMT

Fella,

Thanks a lot for the help and information, I will try immidiately.

As soon as I get back to the office.

Regards,