topic Re: Client can't associate in Wireless

Client can't associate

rmv72 — Sat, 03 Jul 2021 20:43:36 GMT

I've AP 1121G -

here config-

dot11 ssid 354783729734

authentication open

authentication key-management wpa

wpa-psk ascii xxx

interface Dot11Radio0

no ip address

no ip route-cache

encryption mode ciphers tkip

ssid 354783729734

Client -Cisco PI-21AG configured via Cisco ADU -

selected WPA/WPA@ passphrase.

The client can't associate. in log i see

17: dot11_dot1x_send_ssn_eapol_key: eapol->length 95

*Mar 2 21:31:52.217: dot11_dot1x_build_ptk_handshake: building PTK msg 1 for 0040.96b1.59a5

*Mar 2 21:31:52.317: %DOT11-7-AUTH_FAILED: Station 0040.96b1.59a5 Authentication failed

*Mar 2 21:31:52.317: dot11_auth_client_abort: Received abort request for client 0040.96b1.59a5

*Mar 2 21:31:52.317: dot11_auth_client_abort: No client entry to abort: 0040.96b1.59a5 for application 0x1

Which are the possible reasons of that problem?

Re: Client can't associate

amritpatek — Thu, 08 Mar 2007 14:34:47 GMT

The logs clearly indicate that the authentication is failing. Which RADIUS server are you using? And what type of EAP authentication are you using? Has the user database been created on the Radius server? For instructions on configuring WPA on the AP read the document available at http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c40b6.shtml

Re: Client can't associate

chris.sherry — Wed, 29 Aug 2007 18:29:48 GMT

I have the same problem as the person above, but this doesn't seem to be a RADIUS server issue. The client will associate and authenticate when using Windows to configure the card, but using the Intel PROSet utility, it fails. Just looking for suggestions on what else to debug on the AP side. We are migrating to WPA2/PEAP with our prefered method being clients use Windows to configure the connection, but I know there are going to be those that "have" to use the utility.

Re: Client can't associate

engineerangelo — Tue, 18 Sep 2007 02:22:30 GMT

Hi,

Does this happen to only one client?

Regards

Re: Client can't associate

andrew.brazier — Fri, 21 Sep 2007 13:45:23 GMT

If you're using Intel clients, update the drivers and the utility to the latest versions. Older versions are very unstable.