topic Re: WLSE Location Manager in Wireless

WLSE Location Manager

jklausse — Sun, 04 Jul 2021 17:42:39 GMT

I'm trying to add a new campus, but nothing happens!

The WLSE version is 2.11.

Is there anyone out there who has succeeded with creating a new campus in this release?

Thanks!

Re: WLSE Location Manager

rmushtaq — Mon, 25 Apr 2005 23:50:36 GMT

Are you using IE?. Try re-loading the box and see if it helps.

Re: WLSE Location Manager

david.lawrence — Tue, 26 Apr 2005 19:07:01 GMT

I ran into this exact same issue yesterday with 2.11. I will try the suggestion of a box reload and see if that helps. I was accessing WLSE via IE 6.0 SP1.

Re: WLSE Location Manager

mironduplessis — Wed, 27 Apr 2005 07:24:22 GMT

I have also recently installed Ver 2.11 on the WLSE.

I have tried adding a Site/Campus with IE and with Mozilla. There doesnt seem to be a way to add a site or campus through the command line.

Might have to wait for Cisco's next release.

Re: WLSE Location Manager

mironduplessis — Wed, 27 Apr 2005 08:41:41 GMT

I have managed to install a new Campus/Site.

I had to restart the actual WLSE Device.

When it came up worked fine.

Re: WLSE Location Manager

david.lawrence — Wed, 27 Apr 2005 12:20:15 GMT

Still getting the same issue. Have reloaded WLSE from within the webadmin no joy. Have reloaded from the CLI - no joy. Have shut device down and then repowered - still no joy. Using IE 6.0 SP1 with JRE 1.4.2_06.

Any one else still having the same issue after reloading. Tried with my own account (Sys admin role) and with the default admin account. Both the same.

TIA

Re: WLSE Location Manager

mironduplessis — Wed, 27 Apr 2005 15:15:43 GMT

My initial joy was short lived. When I first tried to add a campus and click OK on the Campus/Site add

dialog it never went through just would apply the command.

Once I reloaded the box it came back with the name of the campus that I was trying to create in the list. But when I tried to create another campus it wouldnt go through, not even a reload of the box again would put it in the list.

Seems like the software needs a bit of work.

Re: WLSE Location Manager

MATTHEW BALYUZI — Thu, 28 Apr 2005 06:52:41 GMT

Have a look in the Java console when you hit the OK button when trying to add a campus. I get an error that seems to be database related.

When I get a chance I'm going to try a clean install of 2.11 as I suspect the upgrade from 2.9 hasn't gone perfectly smoothly.

Re: WLSE Location Manager

jklausse — Thu, 28 Apr 2005 14:15:59 GMT

It didn’t work for me, but I have opened a TAC case on this problem!

Re: WLSE Location Manager

paal.fondevik — Fri, 29 Apr 2005 09:49:40 GMT

It could be an impact from the bug in AP's reports that may have created excessive amount of rogues in database.

Please check if this is the case.

1. http://wlse-address:1741/debug/dbquery.jsp

select count(*) from l2devices

2. If the value is more than, say 5,000, try follow the step below

3. http://wlse-address:1741/debug/dbupdate.jsp

delete from l2devices

4. Go to Admin page and restart services

Re: WLSE Location Manager

david.lawrence — Mon, 09 May 2005 10:46:29 GMT

Just finished a clean install of 2.11 built from the ISO image on CCO (May image not the april release) and I can now create different Sites without an issue. I note there is now a download file to apply to 2.9.1 BEFORE you upgrade to 2.11. You also have to take a backup after applying the patch but before the upgrade.

HTH

Re: WLSE Location Manager

mmletzko — Thu, 23 Jun 2005 12:51:15 GMT

Anyone get a REAL answer for this? I just opened a case, but was wondering if anyone else has gotten a solution other than reload the box from scratch.

One of the boxes I upgraded had nothing on it, so to me the 'reload' solution is ridiculous. Upgraded a 2.9 and a 2.9.1 box (applying the pre-patch to both). Both have the same problem.

Re: WLSE Location Manager

jklausse — Thu, 23 Jun 2005 15:58:45 GMT

I got a solution at last...

Had to use a 2.11 recovery CD, and start from beginning. But the upgrade solution was really bad. We started from v. 2.9 -> 2.9.1a -> fix -> 2.11 with no luck!

After this action we don’t have any problems so far.

Jan-Erik

Re: WLSE Location Manager

mmletzko — Thu, 23 Jun 2005 18:50:34 GMT

OK..here's the real solution:

http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsb00795

In case the link doesn't work...here's the bug fix procedure:

Goto http://:1741/debug/dbupdate.jsp

Enter the following SQL statement:

create sequence siteid_seq as integer start with 10001 increment by 1 minvalue 0 no maxvalue no cycle no cache

Re: WLSE Location Manager

emcpherson — Mon, 27 Jun 2005 23:17:37 GMT

I just duplicated this and it works.

Thanks

🙂 Ed

Re: WLSE Location Manager

fbr — Mon, 18 Jul 2005 14:10:04 GMT

Thank you! The 1st option worked perfectly!