Explain output of WDS command - show wlccp wds statistics?

psmith — Sun, 04 Jul 2021 17:32:12 GMT

WLSM is up and running, and is configured for FSR and appears to be working correctly.

My question is what do some of the statistics displayed by the "show wlccp wds statistics" command on the WLSM mean?

Here's my output:

WDS Statistics for last 2d00h:

Current AP count: 79

Current MN count: 87

AAA Auth Attempt count: 1756

AAA Auth Success count: 263

AAA Auth Failure count: 1037

MAC Spoofing Block count: 436

Roaming without AAA Auth count: 322

Roaming with full AAA Auth count:129

Fast Secured Roaming count: 735

MSC Failure count: 0

KSC Failure count: 92

MIC Failure count: 0

RN Mismatch count: 0

Some of these are obvious - AP counts, MN counts, etc., but what is the MAC spoofing block count? I understand the FSR count, but would have thought it would be the same as the Roaming Without AAA Auth count - what's the difference? And what are the failure counts referring to, specifically the KSC failures that I've had 92 of?

I've found this command in the command reference for the AP/Bridges (12.3(2)JA) and in the WLSM Configuration note, but these documents only give syntax or examples of the command and don't explain the output.

Anyone familiar with this command that can shed some light on the stats?

Thanks,

Paul

topic Explain output of WDS command - show wlccp wds statistics? in Wireless

Explain output of WDS command - show wlccp wds statistics?