topic Re: Dynamic WEP in Wireless https://community.cisco.com/t5/wireless/dynamic-wep/m-p/374557#M221965 <HTML><HEAD></HEAD><BODY><P>Can you tell me the operating system running on the Tablet? Do you mean Windows XP? Specifically, I need to know the supplicant you use. (for example the Microsoft XP supplicant also known as Zero Wireless Configuration ZWC)</P><P></P><P>The requirement for dynamic WEP is either 802.1x (i.e. PEAP if you use ZWC or WPA-PSK. You may want to print a screen shot of the PC Tablet and the AP configuration.</P></BODY></HTML> Tue, 01 Feb 2005 01:32:56 GMT dixho 2005-02-01T01:32:56Z Dynamic WEP https://community.cisco.com/t5/wireless/dynamic-wep/m-p/374556#M221964 <P>I have been trying to set up a Compaq Tablet Pc, inbuilt wireless with Tablet XP client, to connect to an AP1200, however I have encountered two major problems.</P><P></P><P>1) We use Dynamic WEP encryption on the AP's at the moment, however I can't find an option within the windows client to allow dynamic WEP.</P><P></P><P>2) If I disable the dynamic WEP and use static WEP I can authenticate (using PEAP) sucessfully and the status shows as connected. I'm using a Static IP address, but I can't seem to access the network once connected. </P><P></P><P>Has anyone come across these issues? I have a Cisco 350 client adaptor working fine from the same AP, configured in a similar fashion, only using the Cisco client.</P> Sun, 04 Jul 2021 17:19:59 GMT https://community.cisco.com/t5/wireless/dynamic-wep/m-p/374556#M221964 will.shaw 2021-07-04T17:19:59Z Re: Dynamic WEP https://community.cisco.com/t5/wireless/dynamic-wep/m-p/374557#M221965 <HTML><HEAD></HEAD><BODY><P>Can you tell me the operating system running on the Tablet? Do you mean Windows XP? Specifically, I need to know the supplicant you use. (for example the Microsoft XP supplicant also known as Zero Wireless Configuration ZWC)</P><P></P><P>The requirement for dynamic WEP is either 802.1x (i.e. PEAP if you use ZWC or WPA-PSK. You may want to print a screen shot of the PC Tablet and the AP configuration.</P></BODY></HTML> Tue, 01 Feb 2005 01:32:56 GMT https://community.cisco.com/t5/wireless/dynamic-wep/m-p/374557#M221965 dixho 2005-02-01T01:32:56Z