topic Basic AP1200 configuration in Wireless

Basic AP1200 configuration

Mark3000 — Sun, 04 Jul 2021 16:39:45 GMT

Hello,

I am looking for the simplest configuration on an AP without any vlan or sub-interfaces configuration. Really the basic configuration for an AP with :

- 1 IP adresse

- 1 Netmask

- 1 Default Gateway

Thx for any help.

Re: Basic AP1200 configuration

smalkeric — Tue, 01 Jun 2004 13:27:19 GMT

Check out the configuration guide,

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo1100/accsspts/i12215ja/i12215sc/index.htm

Re: Basic AP1200 configuration

melisei — Fri, 04 Jun 2004 17:37:24 GMT

#conf t

config)#ip default-gateway x.y.z.w

config)#int BVI1

fig-if)#ip address x.y.z.w 255.0.0.0

fig-if)#no shut

fig-if)#exit

config)#int dot11Radio0

fig-if)#ssid test

fig-if)#no ssid tsunami

fig-if)#exit

config)#exit

#copy run start

Then you can connect to it from the wireless side or wired side using a Web Browser and the x.y.z.w IP config for BVI and configure anything else you may want in there.

Cheers