topic LEAP? in Wireless https://community.cisco.com/t5/wireless/leap/m-p/290562#M222452 <P>Would I be able to use LEAP authentication with a windows 2003 server? If not, what would be my best way to authenticate my wireless clients?</P><P></P><P>All I have is a Cisco 1200 access point, a Cisco 350 wireless PC card, and a Windows 2003 server.</P><P></P><P>Thanks,</P><P></P> Sun, 04 Jul 2021 16:22:16 GMT islj 2021-07-04T16:22:16Z LEAP? https://community.cisco.com/t5/wireless/leap/m-p/290562#M222452 <P>Would I be able to use LEAP authentication with a windows 2003 server? If not, what would be my best way to authenticate my wireless clients?</P><P></P><P>All I have is a Cisco 1200 access point, a Cisco 350 wireless PC card, and a Windows 2003 server.</P><P></P><P>Thanks,</P><P></P> Sun, 04 Jul 2021 16:22:16 GMT https://community.cisco.com/t5/wireless/leap/m-p/290562#M222452 islj 2021-07-04T16:22:16Z Re: LEAP? https://community.cisco.com/t5/wireless/leap/m-p/290563#M222453 <HTML><HEAD></HEAD><BODY><P>LEAP is a Cisco product and is not supported on Microsoft IAS servers. See other posts about that. There are only a few RADIUS implementations from other vendors that support LEAP. Cisco ACS of course would work fine.</P><P></P><P>You can make your 1200 the RADIUS server but it might not be as scalable as you want. If your network is a small one and you don't mind managing the user accounts locally on the AP, I think it would be the easiest.</P><P></P><P>Otherwise, use some other authentication method that would work with IAS.</P></BODY></HTML> Sun, 22 Feb 2004 17:54:52 GMT https://community.cisco.com/t5/wireless/leap/m-p/290563#M222453 plemieux72 2004-02-22T17:54:52Z