topic Re: Implementing multiple WDS domains in Wireless

Implementing multiple WDS domains

harrisn — Sun, 04 Jul 2021 16:21:11 GMT

I have been told that there is a maximum of 30AP's for WDS. is it possible to create more than one "domain" using a single lan for management IP's and multiple wireless vlans (different ip subnets for each vlan in each domain).

Re: Implementing multiple WDS domains

minie — Wed, 11 Feb 2004 02:23:54 GMT

30 APs per WDS is just a guideline, not hard limit.

Each subnet can only have one WDS. However, you can have multiple WDSes with one per vlan.

Re: Implementing multiple WDS domains

LUIGI PIETRONAVE — Thu, 28 Oct 2004 09:24:51 GMT

But how can the WLSE collect data from more than one WDS ? I can only set the WDS credential, without to specify more than one...

Have you any suggest ?

regards

Luigi

Re: Implementing multiple WDS domains

ED CARMODY — Sun, 31 Oct 2004 18:09:47 GMT

What I have been told by TAC is that the WLSE will treat each WDS separately; i.e. you will have two separate managed wireless domains showing up. Radio-management/self-healing/fast-roaming, etc, will not work across the separate WDS domains.

Re: Implementing multiple WDS domains

Timothy Sass — Fri, 05 Nov 2004 07:57:12 GMT

Could you please elaborate on the configuration of two seperate WDS's? How can I configure 2 or more WDS's on one VLAN?

Re: Implementing multiple WDS domains

dixho — Fri, 05 Nov 2004 19:15:07 GMT

Only one WDS AP per VLAN.