topic Re: LEAP authenitcation and WEP in Wireless https://community.cisco.com/t5/wireless/leap-authenitcation-and-wep/m-p/65833#M223134 <HTML><HEAD></HEAD><BODY><P>Make sure your 802.1X Protocol Draft standards match. You should have everything set to "Draft 10" unless you have old cards that don't support it</P></BODY></HTML> Wed, 20 Mar 2002 17:30:27 GMT drynkowski 2002-03-20T17:30:27Z LEAP authenitcation and WEP https://community.cisco.com/t5/wireless/leap-authenitcation-and-wep/m-p/65830#M223131 <P>If anyone can help with this it would be great. I have a 350 AP w/ 11.10 firmware running LEAP, i have a couple 350 workgroup bridges that authenticate with it just fine, but i have a win98 client w/ a 350 pci card in it that will not authenticate. the error i keep getting is Station 00409646007a Failed Authentication, status "Unsupported Authentication Algorithm" Does anyone know how t correct this?</P><P></P><P>Thanks</P> Mon, 05 Jul 2021 06:02:41 GMT https://community.cisco.com/t5/wireless/leap-authenitcation-and-wep/m-p/65830#M223131 mattransfer 2021-07-05T06:02:41Z Re: LEAP authenitcation and WEP https://community.cisco.com/t5/wireless/leap-authenitcation-and-wep/m-p/65831#M223132 <HTML><HEAD></HEAD><BODY><P>hi,</P><P>well my suggestion is to download the latest ACU from cisco site and configure it for LEAP cause i think its easy to configure the latest ACU and u'll able to understand the options.</P><P>cause its the problem of client settings.</P></BODY></HTML> Wed, 20 Mar 2002 05:26:07 GMT https://community.cisco.com/t5/wireless/leap-authenitcation-and-wep/m-p/65831#M223132 sameer 2002-03-20T05:26:07Z Re: LEAP authenitcation and WEP https://community.cisco.com/t5/wireless/leap-authenitcation-and-wep/m-p/65832#M223133 <HTML><HEAD></HEAD><BODY><P>Have you tried updateing the firmware in the card? My experience has been you need to run 4.25.23 to have good sucess with 11.10t...</P></BODY></HTML> Wed, 20 Mar 2002 13:53:14 GMT https://community.cisco.com/t5/wireless/leap-authenitcation-and-wep/m-p/65832#M223133 douglas.hicks 2002-03-20T13:53:14Z Re: LEAP authenitcation and WEP https://community.cisco.com/t5/wireless/leap-authenitcation-and-wep/m-p/65833#M223134 <HTML><HEAD></HEAD><BODY><P>Make sure your 802.1X Protocol Draft standards match. You should have everything set to "Draft 10" unless you have old cards that don't support it</P></BODY></HTML> Wed, 20 Mar 2002 17:30:27 GMT https://community.cisco.com/t5/wireless/leap-authenitcation-and-wep/m-p/65833#M223134 drynkowski 2002-03-20T17:30:27Z Re: LEAP authenitcation and WEP https://community.cisco.com/t5/wireless/leap-authenitcation-and-wep/m-p/65834#M223135 <HTML><HEAD></HEAD><BODY><P>Thanks, bu for my 350 client, it has the newest version of the ACU(5.01.001)and the ndis driver is version 6.97, and the driver verison itself is 4.25.23? any other suggestions???</P></BODY></HTML> Wed, 20 Mar 2002 22:22:01 GMT https://community.cisco.com/t5/wireless/leap-authenitcation-and-wep/m-p/65834#M223135 mattransfer 2002-03-20T22:22:01Z Re: LEAP authenitcation and WEP https://community.cisco.com/t5/wireless/leap-authenitcation-and-wep/m-p/65835#M223136 <HTML><HEAD></HEAD><BODY><P>The Ndis driver you should be running is v8.01.06 to use the features of LEAP.</P></BODY></HTML> Thu, 21 Mar 2002 20:42:05 GMT https://community.cisco.com/t5/wireless/leap-authenitcation-and-wep/m-p/65835#M223136 jim.susic 2002-03-21T20:42:05Z