topic Re: wireless lan controller in Wireless

wireless lan controller

aliabd10 — Mon, 05 Jul 2021 19:47:46 GMT

Please I need to make this SSID is the best performance and speed what Can I do on the tab of QOS

Re: wireless lan controller

Sandeep Choudhary — Tue, 17 Nov 2020 10:03:01 GMT

Depends what you wnat to use throught the ssid.

use voice(Platinum) or video(gold) to get best performance.

Regards

Dont forget to rate helpful posts

Re: wireless lan controller

aliabd10 — Tue, 17 Nov 2020 12:21:04 GMT

i want to use video

Re: wireless lan controller

aliabd10 — Tue, 17 Nov 2020 12:23:16 GMT

what is fastlane benefit

Re: wireless lan controller

Sandeep Choudhary — Tue, 17 Nov 2020 12:28:19 GMT

Please go through these docs:

http://giantsnerdwifi.blogspot.com/2017/07/cisco-wlc-fastlane-for-ios-what-it-does.html

https://easyqos-16.readthedocs.io/en/latest/chapter-10.html

Regards

Dont forget to arte helpful posts

Re: wireless lan controller

Arshad Safrulla — Wed, 18 Nov 2020 01:28:48 GMT

If I were you I wouldnt worry too much abt QOS, I will try to fine tune my RF profiles to best suit the environment where the AP' are in.

I might use QOS a only as a life line.

Re: wireless lan controller

patoberli — Wed, 18 Nov 2020 13:30:15 GMT

First thing to look at is the wireless design and the radio utilization of each and every AP. The radio utilization shouldn't be used by more than 20% (on 2.4 GHz) or 10% (5 GHz) as a rule of thumb if no traffic is flowing. If it is, you might first need to re-do the wireless design.

Next you could look at, is AVC: https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-8/AVC_8point8_dg.html

This can, but not always will, help for certain protocols.

Also remember, the more clients per AP, the less throughput you will achieve. What are your bandwidth requirements (in Mbps per client) and kind of APs and clients?