Need help with AIR-CAP2702I-A-K9, i have the wrong image and cant reset it, also

AmmarHermiz14196 — Mon, 05 Jul 2021 19:50:49 GMT

Hi,

I have the wrong image and cant reset it, also when i type i get weird letters

Please tell what need to do? below is the what have on CLI

i have the wrong image and cant reset it, also

AP003a.7d09.17d8>dn
IOS Bootloader - Starting system.
flash is writable
Antigua Board
40MB format
Tide XL MB - 40MB of flash
Xmodem file system is available.
flashfs[0]: 13 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 41158656
flashfs[0]: Bytes used: 7317504
flashfs[0]: Bytes available: 33841152
flashfs[0]: flashfs fsck took 10 seconds.
Base Ethernet MAC address: 00:3a:7d:09:17:d8
Ethernet speed is 1000 Mb - FULL Duplex
button is pressed, wait for button to be released...
button pressed for 20 seconds
process_config_recovery: set IP address and config to default 10.0.0.1
process_config_recovery: image recovery
image_recovery: Download default IOS tar image tftp://255.255.255.255/ap3g2-k9w7-tar.default

examining image...
DPAA Set for Independent Mode
tide_boot_speed = 1000
DPAA_INIT = 0x0

extracting info (279 bytes)
Image info:
Version Suffix: k9w7-.153-3.JC
Image Name: ap3g2-k9w7-mx.153-3.JC
Version Directory: ap3g2-k9w7-mx.153-3.JC
Ios Image Size: 10322432
Total Image Size: 13384192
Image Feature: WIRELESS LAN
Image Family: AP3G2
Wireless Switch Management Version: 8.2.100.0
Extracting files...
ap3g2-k9w7-mx.153-3.JC/ (directory) 0 (bytes)
extracting ap3g2-k9w7-mx.153-3.JC/ap3g2-k9w7-mx.153-3.JC (215867 bytes).....
Premature end of tar file
ERROR: Problem extracting files from archive.ap:
ap: en
Unknown cmd: en
ap: lwa`p/Ca▒▒
Unknown cmd: lwa`p/Ca▒▒
ap: ▒▒
Unknown cmd: ▒
ap: ▒▒ɕ▒▒▒l쁁▒)
ap: ▒,▒ a`ip Addresslwa`p/ca▒▒
Unknown cmd: ▒,▒
ap: ▒B
Unknown cmd: ▒B
ap: ▒X2Dr▒▒▒
Unknown cmd: ▒X2Dr▒▒▒
ap: ▒
Unknown cmd: ▒
ap:
ap:
ap: lwap`/c▒▒؅▒
Unknown cmd: lwap`/c▒▒؅▒
ap: ▒R▒a▒▒ȕ͍▒
Unknown cmd: ▒R▒
ap:
ap: lwapp/c▒▒؅▒▒
Unknown cmd: lwapp/c▒▒؅▒

Re: Need help with AIR-CAP2702I-A-K9, i have the wrong image and cant reset it, also

Scott Fella — Tue, 01 Dec 2020 05:49:59 GMT

Maybe your terminal setting like baud rate? Also try to download the image again and check the hash to make sure it’s not corrupted. If you are downloading the right image, the file should extract properly.

topic Re: Need help with AIR-CAP2702I-A-K9, i have the wrong image and cant reset it, also in Wireless

Need help with AIR-CAP2702I-A-K9, i have the wrong image and cant reset it, also

Re: Need help with AIR-CAP2702I-A-K9, i have the wrong image and cant reset it, also