topic Re: tacacs+ on WLC CISCO in Wireless

tacacs+ on WLC CISCO

Nadia Bbz — Mon, 05 Jul 2021 19:52:26 GMT

Dear Team ;

i have configured the device administration of cisco WLC using tacacs+ on WLC using Tacacs+

all work fine but when i connect via ssh i can't see in ise the command hits per user ( Command From Device is white ) as show in picture below, On the other hand i can see the hits command in switch

thanks in advance for help

Re: tacacs+ on WLC CISCO

MHM Cisco World — Mon, 07 Dec 2020 02:45:13 GMT

https://www.networkworld.com/article/2982952/device-administration-with-cisco-wlc.html

check this link it answer for your question.

Re: tacacs+ on WLC CISCO

Scott Fella — Mon, 07 Dec 2020 04:38:17 GMT

EDIT:

Are you sure you are hitting a policy when you try to access using ssh? You can look at the live logs detail and look at the device port, because http and ssh would show different.

Re: tacacs+ on WLC CISCO

Nadia Bbz — Mon, 07 Dec 2020 10:23:25 GMT

Dear @Scott Fella ;

the configuration that i was done is in attached