topic Re: SSID speed? in Wireless

SSID speed?

Andrey.A — Mon, 05 Jul 2021 19:53:53 GMT

Hi all,

Let say i have 3 WLANs, with 3 different SSIDs. CORP-ssid for employees laptops, CORP-mobile for employees phones and guest-ssid for guest. If I have 10Mbps internet link, is it possible to set some limitations on those WLANs, so that CORP-ssid use 60% of the link, and other two SSID 2 x 20% ?

I want to set higher "privileges" for CORP-ssid in terms of bandwidth and usage.

Regards,

Andrey

Re: SSID speed?

balaji.bandi — Thu, 10 Dec 2020 15:28:42 GMT

You can do based on the VLAN Associated with SSID

Re: SSID speed?

Leo Laohoo — Thu, 10 Dec 2020 22:06:36 GMT

Depending on the model of WLC and the firmware loaded each SSID can be configured the inbound and outbound bandwidth - per Mbps only.

Re: SSID speed?

Andrey.A — Sun, 13 Dec 2020 17:13:13 GMT

Thank you both for the reply. @Leo Laohoo it is 2504 WLC with 8.5.140.0 image, can you point me to some configuration guide?

Re: SSID speed?

Leo Laohoo — Sun, 13 Dec 2020 22:49:35 GMT

2504 does not support bandwidth limiting per SSID.

Feature only supported on 5508, WiSM2 and bigger appliances.